English INSTRUCTION MANUAL CD/MP3 PLAYER WITH FM RADIO AND USB READER Please read and follow these instructions before using your unit.
OVERVIEW OF THE PLAYER 1 2 3 10 8 4 9 5 6 7 11 12 15 13 14 16 17 18 15 19 20 LOCATION OF CONTROLS 1. FM TELESCOPIC ANTENNA 2. CD DOOR 3. CD DOOR OPEN AREA 4. VOLUME CONTROL 5. STANDBY INDICATOR 6. FM ST. INDICATOR 7. HANDLE 8. USB PORT 9. TUN+/- & NEXT/PREV CONTROL 10. BATTERY COMPARTMENT 11. SOURCE BUTTON 12. PLAY/PAUSE/CH+ BUTTON 13. MODE/PROG/MEM BUTTON 14. POWER BUTTON 15. SPEAKER 16. STOP/CH- BUTTON 17. LCD DISPLAY 18. +10/ALBUM BUTTON 19. DC IN JACK 20.
POWER SUPPLY BATTERY OPERATION 1. Remove the battery compartment cover gently. 2. Install 6 x 'C' size batteries (UM-2 or equivalent) while observing the correct polarities. 3. Replace the battery compartment cover. NOTE: y The AC/DC adapter must be detached from the DC IN jack of the player for battery operation.
HANDLING AND MAINTENANCE OF A DISC Follow the instructions below to handle and maintain your disc in order that long time and trouble free performance can possibly be obtained: y Ensure not to caress the rain bow side of the disc; handle the disc by the edge. y Long time exposure to sunshine, high temperatures and humidity will damage the disc. And keep storage area clean. y Avoid sticking labels on both sides of a disc. Writing with pointed articles on the disc should be strictly avoided.
REPEAT PLAYBACK (CD/MP3/USB) During playback, press the MODE/PROG/MEM button to repeat play a single track; press the button twice to repeat play all tracks; press the button three times to enter the introduction play mode; press the button four times to enter the random play mode; press the button five times to exit. ALBUM SELECTING 1. During MP3/USB playback, Press and hold the +10/ALBUM button till an album number “F…” flashes on the screen. 2.
IMPORTANT SAFETY INSTRUCTIONS y The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. y When the AC/DC adapter is used as the disconnect device, the disconnect device shall remain readily operable. To be completely disconnected the power input, the AC/DC adapter shall be disconnected from the mains completely. y No naked flame sources, such as lighted candles, should be placed on the apparatus.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S www.denver-electronics.com Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen below.
