TFD-1506 15" TFT LCD TV+DVD COMBO Operating Instructions , PAL/NTSC/SECAM B/G,D/K,I,L/L, M (Optional) AC 110-240V 50/60Hz SCART IN, PC IN TELETEXT NTSC PLAYBACK INSIDE DVD SUPPORT FORMAT: SVCD, VCD, WMA, HDCD, KODAK PICTURE CD, DVD MPEG4
TABLE OF CONTENTS Table of Contents 1 Inital Settings(DVD) Specifications 2 Troubleshooting Tips 21 Installation 3 The Causes of interference 22 Important Safety Instruction 4 Warnings and Cautions 5-7 Setup 8 Functional Parts(TV) 9 Functional Parts(DVD) 10 Rear view of TV set 11 Remote Control unit TELETEXT Operations 19-20 12-13 14 Remote Control Operation(DVD) 15-16 MENU Screens 17-18 1
SPECIFICATIONS , B/G,D/K, I, L/ L , M, (optional) Receiving System: Colour System: PAL/NTSC/SECAM / (optional) 391mm(15.4inch) diagonal LCD Panel: Ext.Antenna: 75 Ohm Coaxial Cable PC Input, SCART IN Ext. In/Out: Speaker: 8 Ohm x 2 Audio Output: 2W Power Consumption: AC 110-240V 50/60Hz,60W Dimension: W385 xD180 xH371(mm) Net Weight: 4KG Note:Design and specifications are subject to change without prior notice. OPEN/CLOSE POWER REMOTE CONTROL P.P Transmitting System :Infrared Q.
INSTALLATION Thank you very much for your purchase of this product, the most natural Colour Television Receiver. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. INSTALLATION Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
IMPORTANT SAFETY INSTRUCTION WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
WARNINGS AND CAUTIONS Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Caution Do not insert anything in the ventilation holes. If metal or something flammable enters, it may result in fire or electric shock. Caution Do not place objects on this unit, it may damage the screen surface. Caution Do not squash power supply cord under the television receiver. Caution Do not throw anything at the set.
WARNINGS AND CAUTIONS Caution Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall. Caution Do not place your television on an unstable cart , stand , shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall.
WARNINGS AND CAUTIONS Warning Take care not to connect many appliances to the same mains socket as this could result in fire or electric shock. Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Warning To prevent fire or electrical shock hazard, Do not expose the television receiver to rain or moisture.
¼ò ½é SETUP Remote Control Battery Installation Requires two AAA batteries(supplied). Procedure 1. Turn the remote control face down. Remove battery cover by pressing down on the marking on the cover and sliding it off in the direction indicated. 2. Install batteries matching(+) and(-) polarity signs. 3. Replace the battery cover by sliding in reverse until the lock snaps. Note: Incorrect installation can cause battery leakage and corrosion that will damage the Remote control.
FUNCTIONAL PARTS(TV) Front View of LCD Set 9 V- 8 V+ 7 P- 6 P+ 5 MENU 4 TV/DVD 3 STANDBY 1. LED indicator lamp 2. Remote Sensor 3. Standby Button 4. TV/DVD Button 5. MENU Button 6. P+ Button 7. P- Button 8. V+Button 9. V- Button 1 2 To turn the TV power ON Put the TV set on the correct place, then connect the DC plug of the AC-DC adaptor to the DC 12V socket at the back of the TV set.
FUNCTIONAL PARTS(DVD) 1. DVD Slot 2. Repeat 3. Forward Skip 1 4. Reverse Skip 5. Play/Pause 6. Stop 2 7 3 4 5 6 7. Open/Close Switch this LCD-TV Set to DVD status, insert the disk to DVD slot, and the player will suck it in. Notes: 1.Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. 2.Do not use irregularly shaped CDs (e.g., Heartshaped or octagonal)since they may result in malfunctions. 3.
REAR VIEW OF TV SET DC IN 12V HEADPHONE PC IN FULL-SCART RF INPUT(ANT.) TO DC IN 12V ANT. Full-SCART AUDIO PC IN VGA DC IN 12V TO POWER SOURCE NOTE Precautions when connecting to other equipment When using external equipment with this TV set, please read the instruction manual of the external equipment. Switch off all power supplies to the equipment and TV set before connection. Always ensure that the input and output terminals are correctly connected.
REMOTE CONTROL UNIT OPEN/CLOSE POWER P.P POWER ON/STANDBY button Press this button to switch on the TV when at standby mode or enter standby mode. MUTE button Press this button to mute or restore sound. P.P P.P Button Press this button to select the desired picture mode: NORMAL/SOFT/RICH/CUSTOM. DISPLAY Button Press this button to display the setting on the screen. Q.
REMOTE CONTROL UNIT OPEN/CLOSE POWER P.P MENU Button Press this button to enter the menu screens for various optional adjustable settings. PROG+/- Button Press the program up button to select the program forwards. Press the program Down button to select the program Backwards. VOL+/- Button Press volume up/down buttons to adjust sound level. Q.VIEW Button Press this button to return to the previously viewed program. Q.
TELETEXT OPERATIONS For models with Teletext function only. OPEN/CLOSE POWER P.P TEXT Button Press this button to enter or exit the teletext mode. INDEX Button Press the button to go to the index page. REVEAL Button Press this button to reveal the hidden information for some Teletext pages(e.g. answers to puzzles or riddles). Press again to hide the information. Q.
REMOTE CONTROL OPERATION(DVD) DVD Mode: OPEN/CLOSE POWER POWER Press this button to switch television on or off. OPEN/CLOSE Button P.P Press OPEN/CLOSE button to load disc on disc tray. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position. In case of interactive DVDs with playback control, a menu appears on the TV screen. DVD MENU Button Q.
REMOTE CONTROL OPERATION(DVD) DVD Mode: OPEN/CLOSE POWER P.P REPEAT Button To press this button you can repeatedly play a title(DVD) or all tracks(CD) when¡°ALL ¡±appears on TV screen, you can repeatedly play a chapter (DVD) or a single track(CD) when¡°Repeat chapter¡±appears on TV screen, you can cancel repeat functions when no¡°Repeat off¡±appears on TV screen. PLAY/PAUSE Button Press this button to start playback. Press this button again to pause playback. Q.
MENU SCREENS This TV allows you to adjust any setting from the menu screens using ¡°MENU¡±,¡°VOL+/-¡±and ¡°PROG+/-¡± buttons. Press ¡°MENU¡±button to display the menu, press¡°PROG+/-¡±to change menu from one to another, ¡°VOL+/-¡± to enter the chosen menu, press¡°PROG+/-¡±to select the item, and then press ¡°VOL+/-¡±to adjust each item. Press ¡°MENU¡± again to exit the menu mode. PICTURE MENU You can adjust the contrast, brightness, tint(NTSC only) colour,sharpness.
MENU SCREENS SETUP MENU BULE SCREEN: You can set background ON or OFF. TXT LANGUAGE. SETUP BLUE SCREEN ON TXT LANGUAGE WEST CH ADJUST SELECT EXIT OSD LANGUAGE ENGLISH OSD MENU You can choose the language, adjust the H-position, V-position, duration and halftone. HPOS VPOS CH DURATION HALF TONE ADJUST SELECT EXIT PC MENU(under PC mode only) You can adjust the CONTRAST, BRIGHTNESS PC CONTRAST HPOS/VPOS Press the VOL+/- buttons to adjust the picture Horizontal and Vertical position.
INITAL SETTINGS(DVD) COMMON PROCEDURES OF INITIAL SETTINGS Press SETUP button to get the setup menu. Use direction buttons " " to select the preferred item . AUDIO SETUP PAGE Audio General -- Speaker Setup Page -Downmix Dolby Stereo Video Preference LT/RT Stereo After finishing settings, press SETUP again to TV display. The following menu items can be changed: GENERAL: selects the GENERAL PAGE menu. AUDIO : selects the Audio menu. DOLBY : selects the DOLBY DIGITAL SETUP menu.
INITAL SETTINGS(DVD) PREFERENCE SETUP PAGE Preference Page Audio Dolby Audio General -- Video Eng Subtitle Disc Menu Preference -- Eng Parental Password Default Change Reset 2G 3 Pg 4 Pg 13 5 Pgr 6R 7 Nc17 8 Adult English French Spanish Chinese Japanese Korean Russian English French Spanish Chinese Japanese Korean Russian English French Spanish Chinese Japanese Korean Russian Go To Preference Page The following menu items can be changed: AUDIO: Selects a language for audio(if available).
TROUBLESHOOTING TIPS Before calling for service, you can check the following items on symptoms and solutions. No picture: Check other channel, maybe station problem. Adjust the tuning control. Ensure that the input setting is at TV state. Ensure that the LCD is on. Ensure that the equipment is connected properly. No sound and distorted sound: Ensure that the input settings for the TV and sound are proper. Adjust the tuning control. Probably local interference, such as an appliance.
THE CAUSES OF INTERFERENCE Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.Local radiation however, can create disturbances which visibly affect your picture. Proper installation, a good aerial are your best safe-guards against these disturbances. RF INTERFERENCE Moving ripples across the screen are caused by nearby transmitting or receiving short-wave radio equipment.
»ù±¾²Ù×÷
