TFD-1923WHITE 19" TFT LCD TV+DVD COMBO Operating Instructions , PAL/SECAM B/G,D/K, I, L/L , (Optional) AC 110-240V 50/60Hz SCART IN, PC IN TELETEXT NTSC PLAYBACK INSIDE DVD SUPPORT FORMAT: SVCD, VCD, WMA, HDCD, KODAK PICTURE CD, DVD MPEG4
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.
TABLE OF CONTENTS Table of Contents 1 Inital Settings(DVD) Specifications 2 Troubleshooting Tips 17 Installation 3 The Causes of interference 18 Warnings and Cautions 4-5 Setup 6 Functional Parts(TV) 6 Functional Parts(DVD) 7 Rear view of TV set 7 Remote Control unit TELETEXT Operations 15-16 8-9 10 Remote Control Operation(DVD) 11-12 MENU Screens 13-14 1
SPECIFICATIONS Receiving System: Colour System: LCD Panel: Ext.Antenna: Ext. In/Out: , B/G,D/K,l,L/L , (Optional) PAL,SECAM,(optional) 482.6mm(19inch) diagonal 75 Ohm Coaxial Cable HDMI,YPbPr,AV,PC Input, SCART IN,Earphone Speaker: 8 Ohm Audio Output: 3W x 2 Power consumption: Standby power consumption: Power Supply: 60W 3W AC 110-240V 50/60Hz Dimension: W480X D195.8X H398(mm) Net Weight: 5.5KG Note:Design and specifications are subject to change without prior notice. OPEN/CLOSE POWER P.
INSTALLATION Thank you very much for your purchase of this product, the most natural Colour Television Receiver. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. INSTALLATION Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
WARNINGS AND CAUTIONS Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Caution Do not insert anything in the ventilation holes. If metal or something flammable enters, it may result in fire or electric shock. Caution Caution Do not squash power supply cord under the television receiver. Do not place objects on this unit, it may damage the screen surface. Caution Caution Do not throw anything at the set.
WARNINGS AND CAUTIONS Caution Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical component. Warning Avoid exposing the television receiver to direct sunlight and other source of the heat. Do not stand the television receiver directly on other produces which give off heat .E.g.video cassette players. Audio amplifiers. Do not place naked flame sources, such as lighted candle on the television.
¼ò ½é SETUP Remote Control Battery Installation Requires two AAA batteries(supplied). Procedure 1. Turn the remote control face down. Remove battery cover by pressing down on the marking on the cover and sliding it off in the direction indicated. 2. Install batteries matching(+) and(-) polarity signs. 3. Replace the battery cover by sliding in reverse until the lock snaps. Note: Incorrect installation can cause battery leakage and corrosion that will damage the Remote control.
FUNCTIONAL PARTS(DVD) 1 1. DVD Slot Once you insert the disk to DVDslot, the player will suck it in, and the current source will be switched to DVD status automatically. Notes: 1.Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. 2.Do not use irregularly shaped CDs (e.g., Heartshaped or octagonal)since they may result in malfunctions. 3.Some playback operations of DVDs and Video CDs may be intentionally programmed by software manufacturers.
REMOTE CONTROL UNIT OPEN/CLOSE POWER P.P POWER ON/STANDBY button Press this button to switch on the TV when at standby mode or enter standby mode. MUTE button Press this button to mute or restore sound. P.P P.P Button Press this button to select the desired picture mode: NORMAL/SOFT/DYNAMIC/CUSTOM DISPLAY Button Press this button to display the setting on the screen. Q.
REMOTE CONTROL UNIT OPEN/CLOSE POWER P.P MENU Button Press this button to enter the menu screens for various optional adjustable settings. PROG+/- Button Press the program up button to select the program forwards. Press the program Down button to select the program Backwards. VOL+/- Button Press volume up/down buttons to adjust sound level. Q.VIEW Button Press this button to return to the previously viewed program. Q.
TELETEXT OPERATIONS (OPTIONAL) For models with Teletext function only. OPEN/CLOSE POWER TEXT Button Press this button to enter or exit the teletext mode. INDEX Button Press the button to go to the index page. P.P REVEAL Button Press this button to reveal the hidden information for some Teletext pages(e.g. answers to puzzles or riddles). Press again to hide the information. Q. VIEW -/-- SWAP REPEAT MUTE SOURCE MIX Button Press this button enter to mix mode.
REMOTE CONTROL OPERATION(DVD) DVD Mode: OPEN/CLOSE POWER POWER Press this button to switch television on or off. OPEN/CLOSE Button P.P Press OPEN/CLOSE button to load disc on disc tray. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position. In case of interactive DVDs with playback control, a menu appears on the TV screen. DVD MENU Button Q.
REMOTE CONTROL OPERATION(DVD) DVD Mode: OPEN/CLOSE POWER P.P REPEAT Button To press this button you can repeatedly play a title(DVD) or all tracks(CD) when¡°ALL ¡±appears on TV screen, you can repeatedly play a chapter (DVD) or a single track(CD) when¡°Repeat chapter¡±appears on TV screen, you can cancel repeat functions when no¡°Repeat off¡±appears on TV screen. PLAY/PAUSE Button Press this button to start playback. Press this button again to pause playback. Q.
MENU SCREENS This TV allows you to adjust any setting from the menu screens using ¡°MENU¡±,¡°VOL+/-¡±and ¡°PROG+/-¡± buttons. Press ¡°MENU¡±button to display the menu, press¡°PROG+/-¡±to change menu from one to another, ¡°VOL+/-¡± to enter the chosen menu, press¡°PROG+/-¡±to select the item, and then press ¡°VOL+/-¡±to adjust each item. Press ¡°MENU¡± again to exit the menu mode.
MENU SCREENS PC PC SETUP OSD TXT LANGUAGE WEST LANGUAGE NOISE REDUCE ON H-POSITION BLUE SCREEN OFF V-POSITION ENGLISH DURATION HALFTONE OSD SIZE MOVE SELECT EXIT MOVE 2 TIMES SELECT EXIT SETUP MENU OSD MENU TXT LANGUAGE.You can choose the supported You can choose the language, adjust the H-position, teletext fonts among AUTO,WEST,EAST,RUSSIAN, V-position, duration 1 halftone and size.. ARABIC and FARSI. NOISE DURACE: You can set the noirse filter to ON or OFF.
INITAL SETTINGS(DVD) COMMON PROCEDURES OF INITIAL SETTINGS AUDIO SETUP PAGE Dolby Press SETUP button to get the setup menu. Use direction buttons " " to select the preferred item . After finishing settings, press SETUP again to TV -- Analog Audio Setup Page Downmix -- Stereo LT/RT Stereo display. The following menu items can be changed: GENERAL: Selects the GENERAL SETUP PAGE menu. AUDIO : Selects the AUDIO SETUP PAGE menu.
INITAL SETTINGS(DVD) PREFERENCE SETUP PAGE Dolby -- -- Preference Page Audio Eng Subtitle Eng Disc Menu Eng Parental MPEG4 SP Default WEST. Reset WEST. UR CENT. UR English French 1 Kid Spanish 2G Chinese 3 Pg Japanese 4 Pg 13 Korean 5 Pgr Russian 6R 7 Nc17 8 Adult English French Spanish Chinese Japanese Korean Russian English French Spanish Chinese Japanese Korean Russian Go To Preference Page The following menu items can be changed: AUDIO: Selects a language for audio(if available).
TROUBLESHOOTING TIPS Before calling for service, you can check the following items on symptoms and solutions. No picture: Check other channel, maybe station problem. Adjust the tuning control. Ensure that the input setting is at TV state. Ensure that the LCD is on. Ensure that the equipment is connected properly. No sound and distorted sound: Ensure that the input settings for the TV and sound are proper. Adjust the tuning control. Probably local interference, such as an appliance.
THE CAUSES OF INTERFERENCE Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.Local radiation however, can create disturbances which visibly affect your picture. Proper installation, a good aerial are your best safe-guards against these disturbances. RF INTERFERENCE Moving ripples across the screen are caused by nearby transmitting or receiving short-wave radio equipment.