22″ TFT LCD TV & DVD COMBO TFD-2201 Instruction Manual
Dear Customers Thanks for purchasing this TFT-LCD TV/Monitor. We strongly recommend that you carefully read the safety and operation instructions before operating your TV/Monitor. FOLLOW INSTRUCTIONS AND HEED ALL WARNINGS on your TFT-LCD TV/Monitor and in this manual. Safety information __________________________________________________ Note: Before connecting the AC power cord to the DC adapter outlet, make sure that the voltage designation of the DC adapter corresponds to the local electrical supply.
Precautions ________________________________________________________ Please read the below precautions carefully before operating the unit. Power cord protection: 1. Never use your LCD TV/Monitor if the power cord has been damaged. Do not put anything on the power cord, and keep the power cord away from where people can easily trip over it. 2. Be sure to hold the plug , do not pull the cord when disconnecting the LCD TV/Monitor from an electric socket. 3.
Keep away from water/magnetic fields: 1. Do not expose the LCD TV/Monitor to rain or use it near water source. If the LCD TV/Monitor got wet, unplug it and contact an authorized dealer immediately. 2. Do not clean the front panel with Ketone-type materials, ethyl alcohol, toluene, acid, methyl, or chloride since they may cause damage on panel. 3. Keep the unit away from flower vases, tubs, sinks etc. if liquids spill into the unit, serious damage will occur. 4.
Unpacking ____________________________________________ Please make sure that the following items are included with your LCD TV/Monitor. If any item is missing, please contact your dealer.
I. View of the TV/Monitor Front view 2 Back view 1 12 3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 21 1. Remote sensor 12. DVD disc slot in 2. Power button & indication light 13. DC input jack/Car cord input jack 3. DVD play/pause button 14. SCART jack 4. DVD stop playing button 15. PC audio in jack 5. DVD open/close button 16. VGA jack 6. P+/Up direction button 17. Audio in (Right) jack 7. P-/Down direction button 18. Audio in (Left) jack 8. VOL+/Right direction button 19.
II. Remote control reference guide (1) Remote control function 1. DVD open/close 2. Video out mode button 3. SLEEP button 4. 0-9 Numerical button 5. Program play button 6. Volume down button 7. Unit system menu button 8. Display status message button 9. DVD stop button 10. DVD ENTER/PLAY button 11. DVD fast rewind button 12. DVD fast forward button 13. DVD MENU display button 14. Direction button (Up) 15. Direction button (Left) 16. DVD system setup button 17. ANGLE button 18. Direction button (Down) 19.
● TELETEXT BUTTONS (If TV has teletext function.
batteries into the fire. 3. Always replace both batteries at the same time. Never mix new and old batteries or batteries of a different type. 4. If you don’t intend to use the remote controller for an extended period, remove the batteries to prevent possible leakage and corrosion. Notes: 1. Do not drop, apply shock or step on the remote control. 2. Do not spill water on the remote control. 3. Do not use the remote control for other equipments at the same time 4.
Use 75Ωcoaxial cable plug or 300-75Ωimpedance converter to plug in antenna input terminal on the rear of the cabinet. VHF antenna UHF antenna 75ΩCo-axis cable Mixer Input terminal of antenna Co-axis antenna plug Antenna in jack 2. 75ΩCo-axis cable Connect the audio sources (Including DVD, VCDR, CAMCORDER and PC) to the proper AUDIO input jacks ‘L’ and ‘R’. 3. Connect the video source to the VIDEO jack by RCA cable. 4.
color . Press the POWER or STANDBY button again to switch off the power, and the light will be in red color. 2. The Picture setup, Sound setup, Previous channel can be memorized before you switch off the TV/Monitor. The TV/Monitor will re-start under the previous state when you switch on it again. 3. Press the V - or V + button to adjust the volume output. Press the V button repeatedly to decrease the volume; press the V + button repeatedly to increase the volume from 0 to 100. 4.
Select the suitable input to pickup the AV signal. Press P+ or P- button to select source, then press V + button to confirm your selection. Or press DVD Button on the remote control to select DVD source directly. TV AV SVideo DVD SCART PC Note: When no disc in the DVD mechanism, if you want to change the mode from DVD to TV, please wait several seconds until the LCD screen shows "No Disc". (4) View the TELETEXT program (Optional. If TV has this function.) 1. Press the TV/AV button to select the TV mode.
The unit has a VGA jack for a normal computer. Connect the monitor with a PC by this jack and the unit can be used as the monitor of the PC. V. Menu setting and adjustment 1. PICTURE SETTING Press the MENU button on the remote control, there will be a menu displayed on the screen as below: On this menu, the Picture setting icon of is in red frame. (1). Use the V+ button firstly, the cursor will be on the line of “Picture Mode: Vivid”.
2. SOUND SETTING Press the MENU button on the remote control, and then press the P- button to select the Sound setting, the Menu will be shown as below: On this menu, the Sound setting icon of is in red frame. (1). Use the V+ button firstly, the cursor will be on the line of “Sound Mode: Normal”. And then, press the V+ or V - button repeatedly to select the picture mode from Normal, News, Movie or User. (2).
On this menu, the Channel setting icon of (1). Auto Tune is in red frame. Use the V+ button firstly, the cursor will be on the line of “Auto Tune ”. And then, press the V+ button again, a menu will be displayed as followed: As shown on the menu, the TV will automatically search stations. When searching, press the MENU button to cancel searching. After the searching, the TV will begin to play the station 1. (2).
(4).Skip Press the P- or P+ button to select the skip setting, and press the V- or V+ button repeatedly to select On or Off. Setting to “On”, the channel will not be selected by Channel Up/Down keys. (5).Sound SYS. Press the P- or P+ button to select the Sound SYS. setting, and press the V- or V+ button repeatedly to select .You could choose D/K,L,LL ,B/G or I according to your local TV sound system. (6).
Press the MENU button on the remote control, and then press the P- button to select the Function setting, the Menu will be shown as below: On this menu, the Function setting icon of (1).Language is in red frame. Use the V+ button firstly, the cursor will be on the line of English “Language ”. And then, press the V+ or V - button repeatedly to select the language you need (2).Blue Back Move the cursor to the line of On “Blue Back ”.
Press the V+ or V - button repeatedly, you could select User, Normal, Warm or Cool according to your request. Note: Only the item of User-R , User-G or User-B could be adjusted from 0 ~100 in the Color Temp User . (5).DNR Press the V+ or V - button repeatedly, you could select Strong, Normal or Weak (6)Reset Press the V+ or V -button to reset After setting, press the MENU button to return to the root menu or exit the setting menu. Note: a. Only the item of Language , Color Temp.
On this menu, the PC setting icon of is in red frame. You can use the P- or P+ button to select the item of Clock, Phase, H-Position or V-Position. And then use the V- or V+ button to adjust the value of each item respectively from 0~100. VI. DVD PLAYER OPERATION a. Basic play 1. Press the TV/AV button on the unit or the remote control to select the DVD function mode. Or press DVD button of the remote control directly. 2. Insert a disc into the slot of DVD player and it will be read automatically. 3.
If press the STOP button once, the DVD video player is stopped. At this point, press the ENTER/PLAY button to re-start the disc from the same point. If press the STOP button twice, the disc will stop completely. FAST FORWARD/ REWIND Press the or button once, the disc will be played forward or backward. With each subsequent press, the disc will be played back at 2x, 4x, 8x, 16x or 32X speed. Press ENTER/PLAY button to return to normal play.
REPEAT A SPECIFIC SECTION You could repeat section by REPEAT A-B button on the remote control. Firstly press the REPEAT A-B button at the beginning of the section you want, and press it again at the end of the section. So the unit will repeat to play from A to B. if you want to cancel the repeat section, please press REPEAT A-B once again. Be aware that some discs will not respond to the A-B repeat function. e.
to show the current information available, you will get the information like Title Elapsed; Title Remain; Ch. Elapsed; Ch. Remain; Display Off and so on. Notes: For different discs, DISPLAY button may be have different functions. j. PLAYING IN A FAVORITE ORDER Combine your favorite titles, chapters or tracks and play them in your favorite order.
the same point. If press the STOP button twice, program playing will be cancelled. k. SELECTING THE CAMERA ANGLES SETTING This DVD video player allows you to select from several different angles. Press the ANGLE button while playing back a scene recorded with multiple angles. You may only press the ANGLE button when the angle icon is flashing on the DVD display. Each time you press the ANGLE button, the angle will change. Press ENTER/PLAY button to confirm.
m. MP3 OPERATION 1. To play MP3 disc you must view through your television. Insert an MP3 CD, the DVD video player will initialize the disc and the directory (folder) will be shown in an MP3 MENU on screen. 2 Press the / button twice to select and highlight the PLAY MODE. / Then press the button each way to select play mode options (repeat, shuffle, etc.) Then press the / button twice then the “down” key to select and highlight an MP3 file (song).
(1) TV Display: you could choose the suitable type for your TV. (2) Angle Mark: you could choose ON or OFF (3) OSD language: you could choose your favorite language (4) Captions: you could choose ON or OFF (5) Screen saver: if screen saver on, there will be saver display when displayed on the TV screen. there is no operation for several minutes. 2. AUDIO SETUP You could choose AUDIO OUT mode as SPEAKER SETUP, AUDIO SETUP, could setup to get the best sound as followed: 3.
a. disc stop playing completely or b. disc is opened or c. Without disc in the disc mechanism.
Now you could enter preset old password: 1234 by numeric button firstly, then enter the new password that you want to set. And at last press ENTER/PLAY button again to confirm the new password that you have set VII. Other Operation a. Earphone operation This unit possesses earphone jack. Connect the earphone with the socket and adjust the volume to what you want. Once plugged in, the speaker output will be cut off automatically. b.
Can’t operate system External interference with the Pull out the plug and insert CPU. again. b. TV/Monitor Symptom Remedy 1. Check whether the power plug is connected to the power No power supply. 2. Pull out the plug and wait for 60 seconds, and then insert the power plug again and switch on the TV/monitor. No picture 1. Check whether the antenna is connected properly. 2. Adjust to another channel. 3. Change the length and the contrast setting. 4.
Screen glittering under PC mode Reset the computer and enter into the safety mode, then select the appropriate screen type by consulting the operation manual. Screen traversed Maybe the phase is not appropriate. Enter into the PC under PC mode setting and change to correct level. IX. Notes (1) Please read these operating instructions carefully before you operate this unit. (2) When you want to cut off the electricity supply of the whole unit’s power, please press the POWER button on the unit.
Please keep the discs away from direct sunlight, high temperature and humidity. Do not stick labels onto discs. Do not scratch the surface of discs. X. Maintenance 1). Cleaning the cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. 2). Cleaning discs When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre outwards.
XI. Specifications Screen size, visible 22 inch Screen format 16:10 Resolution 1680 * 1050 Minimum contrast ratio 700:1 Minimum brightness 300 cd/m² Display colors 16.7M Minimum viewing angle 170° (horizontal) / 160° (ver tical) Maximum response Time 5 ms Minimum lifetime background light 50,000 hours Video color systems PAL/NTSC3.58/NTSC4.
Power Consumption Max 60W XII. Display modes Resolution 1. Horizontal Freq. (KHz) Vertical Freq. (Hz) 720x400 31.5 70 640x400 31.5 70 640x480(VGA) 31.5 60 640x480(VGA) 37.9 72 640x480(VGA) 37.5 75 800x600(SVGA) 37.9 60 800x600(SVGA) 47.2 72 800x600(SVGA) 46.9 75 1024x768(XGA) 48.4 60 1024x768(XGA) 56.5 70 1024x768(XGA) 60.0 75 1280x1024(SXGA) 63.5 60 1280x1024(SXGA) 80.0 75 Modes, which are not listed in the above table, may not be supported.
your computer’s power management function. Note: Design and specifications are subject to change without notice. “ ELIMINATION OF RESIDUES OF ELECTRIC AND ELECTRONIC APPLIANCES BY CONSUMERS RESIDENT IN THE EUROPEAN UNION.” This symbol on the product or in its packaging indicates that it must not be disposed off with other household waste produced in the user`s residence.
