User`s manual

Operation
4. Press LCD MENU to return to the previous menu
or press EXIT to exit the main menu.
1. Press and to select SETUP in the main menu.
2. Press and to select SETUP menu.
3. Press and to adjust.
Note: Before you perform Auto Tuning, you must choose the country where you are by selecting COUNTRY option in the
FUNCTION menu.
Note: Before you perform Auto Tuning, you must choose the country where you are by selecting COUNTRY option in the
FUNCTION menu.
LanguageLanguage
This option allows you to select the language of OSD (on screen display) by pressing and .
Auto tuningAuto tuning
This option allows you to tune the channels that can be received automatically.
3. Press ENTER to start Auto Tuning as below:
1. Press and to select Auto Tuning in SET UP menu.
2. Press and to perform your selection.
4
4. During searching, you can press EXIT to stop tuning
at any moment, and return to the previous menu.
CountryCountry
Press / button and then use / to select one of country as following: AUSRIA/BELGIUMC/CROATIA/CZECH/DENMARK/
FINLAND/FRANCE/GERMANY/GREECE/HUNGARY/IRELAND/ITALY/LUXEMBOCERG/NETHERLAND and others.
NOTE:
- Your country is not included in the above list, please refer to page 30 (worldwide TV system)
.
The selection of the country will effect the Auto Scan and Teletext functions. So please select the correct country
where the user in
NOTE:
.