26” TV/DVD COMBO Model NO.
Contents Caution Caution Safety Information 1 2 Product Introduction Front View Rear View 3 3 3 Connections 4 Remote Control 5-6 Basic Operation 7 OSD Menu 1. Video menu 2. Audio menu 3. TV menu 4. Setup menu 5. Time menu 6.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor. • To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Product Introduction Product Introduction Introduction 1. Front View Insert a 12cm disc according to the silk. Remote Control window POWER to turn on and off. Null The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 300 to the left or right side and 200 above or below the remote control window. TV/AV: MENU: CH+/-: Press to scan through channels. VOL+/-: PLAY: Play/Pause DVD program. EJECT: Load/eject DVD disc.
Connections Connections SWITCH SCART PC Audio In RJ45 USB HDMI1 HDMI2 HDMI3 RF SWITCH: Switch on or off the power suply. SCART: Connect them to the SCART video output terminal of DVD. YPbPr: Connect them to the YPbPr video output terminal of DVD. VIDEO: Connect it to video output terminal of DVD.(used in AV source) R/L in: Connect them to the audio output terminal of DVD.(shared with YPbPr) PC AUDIO IN: Connect it to the audio output terminal of PC. VGA: For PC display.
Remote Control Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. MUTE POWER PICTURE SOUND FREEZE AUTO SLEEP NICAM SUBPAGE SIZE EPG POWER: Turn the TV on/standby. MUTE: Press to mute the sound, press again or press VOL+ to unmute. PICTURE: Select the picture mode. SOUND: Select the sound mode. FREEZE: Catch the picture of the current program.
Remote Control Remote Control MUTE POWER PICTURE SLEEP EPG SOUND NICAM FREEZE SUBPAGE AUTO SIZE LANGUAGE SUBTITLE TV/RADIO INPUT INFO OK VOL+/-: Adjust the volume. CH+/-: Scan through channels. Colour buttons: short cuts-follow the coloured links in the text. FAV: Display the favourite program list. FAV+: Add the program to the favourite program list. FAV-: Remove the program from the favourite program list. ASPECT: Press to change the display mode of the screen.
Basic Operation Basic Operation Power on/off 1. Connect to the power with a power code, and turn on the switch. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control.
OSD Menu OSD Menu 1. Video menu Brightness 50 Picture Mode Contrast 50 Color Temp Saturation 50 NR Sharpness 50 MP EG NR Low Cinema Mode Low Move OK Select Standard Normal Low EXIT Exit Description ĥ Ĥ Adjust menu (Brightness menu for example) Adjust menu: Press / button to adjust, and press Ĥ / ĥ button to switchover between Brightness, Contrast, Saturation, Sharpness. Brightness: Adjust image black level. Contrast: Adjust image contrast. Saturation: Adjust image saturation.
OSD Menu OSD Menu 2. Audio menu Volume 50 Sound Effect Balance 0 SPDIF Output Treble 50 Equalizer Bass 50 Move OK Select Normal OFF EXIT Exit Description Volume: Adjust vollume. Balance: Adjust the audio output between left and right speakers. Treble: Adjust the level of the higherpitched sounds. Bass: Adjust the level of the lower-pitched sounds. Sound Effrct: Select the sound effect from BBE, SRS, Normal. SPIDE Output: Select the Spide Ouput mode from Off, PCM, RAW.
OSD Menu OSD Menu 3. TV menu(In ATV/DTV mode) Program Edit Auto Search EPG Manual Search Move OK Select EXITExit Description Program Edit: Enter the Program Edit menu as below: Fav. Service Type ATV Network ALL 1 CATV1 6 CATV6 2 CATV2 3 CATV3 4 CATV4 5 CATV5 Lock Skip Press color key to edit Rename Delete Swap Move Move OK Select EXITExi ĥ Ĥ Service Type: Select the Service Type you want.
OSD Menu OSD Menu Fav.: Press OK button to add the program to the favorite channel list, and press OK button to cancel. Lock: Press OK button to lock the channel, and you have to enter the code to view the program. (Note: you should set the code in Parent control menu of OTHERS menu). Press OK button to cancel. Skip: Press OK button to skip the channel, and the channel will be skipped when you scan the channels by CH+/- buttons, and press OK button to cancel.
OSD Menu OSD Menu Manual Search(in ATV mode): Press OK button to enter the Manual menu. On Color System Auto Frequency 49.78MHz Signal Strength Sound System Store B /G Ĥ AFT 0 ĥ Channel No. Note: Press / button to select. 2% Channel No.: Select the channel you want to manual search. Color System: Select the Color System for the channel. Sound System: Select the Sound System for the channel.
OSD Menu OSD Menu 4. SETUP menu Denmark Country Network Setup Wizard English OSD Language R eset Audio Language Teletext Language English Subtitle Move OK Select EXIT Exit Description Country: Select the Country in ATV/DTV mode. OSD Language: Select the OSD language. Audio Language: Enter the submenu and select the audio languages for the programs in DTV mode. Teletext Language: Select th Teletext language in ATV/DTV mode.
OSD Menu OSD Menu 5. Time menu Time Mode Auto Sleep Time Off Current Time WakeUp Timer Move ENTER Select Exit Exit Description Time Mode: Select Time mode from Auto or Maunal. Note: You should select Manual mode when you want to setting the Current Time below. Sleep Time: Set the sleep time for the TV. Current Time: Press OK button to enter the submenu and set the current time yourself. WakeUp Timer: Press OK button to enter the submenu and set the wakeup timer for the TV. Current Time .
OSD Menu OSD Menu 6. OTHERS menu Screen Mode Auto Parent Control PIP Off PIP Position Blue Screen Top Left Off Move OK Select EXIT Exit Description Screen Mode: Select the screen mode for the TV from auto, 16:9Wide, 16:9 Zoom,16:9 Subtitle, 4:3. Parent Control: Press OK button and enter the code by the number buttons to enter Parent Control menu(the original password is 8888).
OSD Menu OSD Menu 7. PC menu(In PC mode) PC V.Position 50 Auto Adjust H.Position 50 Auto Phase Phase 50 Reset Clock 50 Move OK Select EXIT Exit Description V.Position: Adjust the vertical position of the picture. H.Position: Adjust the horizontal position of the picture. Phase: Adjust the phase of the picture. Clock: Adjust the clock of the picture. Auto Adjust: Auto adjust the PC/VGA settings. Auto Phase: Auto adjust the phase of the picture.
DVD Basic Operation DVD Basic Operation Turn on your TV then use the TV/AV button on the remote control or on the TV to select DVD mode. If there is no disc in the DVD players the screen will show “NO DISC”. Place a disc Insert a disc according to the silk. Do not touch the playing surface. automatically draw the disc into the player. To "Eject" the disc, press the " " (EJECT)button on the remote control or on the TV.
DVD Basic Operation DVD Basic Operation 18
DVD System Setup DVD System Setup OK 19
DVD System Setup DVD System Setup 20
DVD Basic Operation DVD Basic Operation 21
DVD Basic Operation DVD Basic Operation 22
Disc Care Disc Care 23
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control.
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.