Specifications

DVD PLAYER OPERATION
Basic Operation
1. Press TV/DVD button on the remote controller or DVD button on the TV set to turn on ( or off ) DVD .
2. Press OPEN / CLOSE button to load disc into disc tray.
3. Press OPEN / CLOSE button to close the tray.
Hold the disc without touching either of its surfaces, position it with the printed title side
facing up, align it with the guides, and place it in its proper position.
DVD Setup Mode
Setup Mode provides the menu for the configuration of General Setup Page, Speaker Setup Page, Dolby DigitalSetup ,
Video Setup Page and Preference Page .
Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP button and the OK button.
Press the SETUP button first , enter into SETUP menu, then press the DIRECTION RIGHT button, you can enter into the next
Sub-menu.
Press the SETUP button again to exit the Setup Menu,
1. General Setup
Angle Mark
This only works when there is an
angle mark on the disc. Select
ON, the screen shows the mark
when playing DVD.
.
On
. Off
OSD Language
This is used to select the OSD language.
.
English
German
. Danish
Swedish
Spanish
TV Display
PS
This is selected when the DVD
player is connected to a normal
TV. Wide-screen images are shown
on the screen, but with some parts
cut automatically.
LB
This is selected when the player is
connected to a normal TV. Wide-screen images are
shown on the screen, with black belt on the top and
bottom.
Wide
This is selected when the player
is connected to a wide-screen TV.
12
Screen Saver On
Digital Output RAW
OSD Language ENG
Angle Mark On
TV Display PS
Normal / PS
Normal / LB
Wide
Set TV Display Mode
TV Display PS
Angle Mark On
OSD Language ENG
Digital Output RAW
Screen Saver On
Off
On
Set Angle Mark
English
Set OSD Language English
TV Display PS
Angle Mark On
OSD Language ENG
Digital Output RAW
Screen Saver On
Spanish
Swedish
Danish
German