Instructions / Assembly

ASSEMBLY INSTRUCTION
Sling Chair
STEP 1
Lie frame at on the ground. Make sure that
the notched frame section is facing up-
wards.
Locate the frame section with double rods
close together. Lift this side off the ground
and use the remaining outer section to lock
the chair at your desired angle.
STEP 2
Once frame is locked in at desired
angle, slip one end of the fabric through
the double rods in the frame (A). Then, slide
a retaining rod through the looped end of
the fabric piece (B). This rod will secure the
fabric in place and retain tension while chair
is in use.
STEP 3
After completing the previous step, re-
peat on the other end of the frame. When
fabric is securely in place on both ends,
relax and enjoy your sling chair!
WHAT’S INCLUDED
1 x wooden frame 2 x retaining rods 1 x piece of fabric
©2022 Deny Designs
A
B
?
Contact [e-mail]
Chair is rated for up to 250 lbs (113kg).
Sling chairs should be stored indoors when not in use.