Installation guide

113
U:)#:)*
A&.'1-*M2#*
V&WM2#*
S%&WM2#*
A:8=""D-%*
+X*
no!connection!
no!connection!
Woofer!1!
Sub!1!
+Y*
Speaker!1!(left)!
Woofer!1!
Mid7range!1!
no!connection!
+Z*
no!connection!
Tweeter!1!
Tweeter!1!
no!connection!
LX*
no!connection!
no!connection!
Woofer!2!
Sub!2!
LY*
Speaker!2!(right)!
Woofer!2!
Mid7range!2!
no!connection!
LZ*
no!connection!
Tweeter!2!
Tweeter!2!
no!connection!
The PDC Configuration also includes reserved memory space on the PDC Hardware that can be
used for storing correction filters. For each Speaker Configuration connected to the PDC
Configuration, there can be speaker correction filters to filter the audio signal from input to output.
The supported PDC Configurations are listed in the table below. In this table the ‘L’ and ‘R’ are
assumed to be the left and Right channels respectively. When using multiple PDC units this may
not be the case and the actual loudspeaker connected to a channel will depend on the installation.
I3!*!".D&':%7)&".*
M11",7)-?*U:)#:)*
+*!(7..-1/*
L*!(7..-1/*
A&.'1-*M2#*=&)(*A)-%-"*A:8/*
L2!–!Left!Speaker!
R2!–!Right!Speaker!
L1!–!Left!Subwoofer!
L1!–!Left!Subwoofer!
A&.'1-*M2#*=&)(*E"."*A:8*
L2!–!Left!Speaker!
R2!–!Right!Speaker!
L1!–!Mono!Subwoofer!
R1!–!Same!as!L1!
V&*M2#*=&)(*A)-%-"*A:8/*
L3!–!Left!Tweeter!
R3!–!Right!Tweeter!
L2!–!Left!Woofer!
R2!–!Right!Woofer!
L1!–!Left!Subwoofer!
R1!–!Right!Subwoofer!