Installation guide

120
However, the higher the slope of a linear phase crossover, the greater the delay required to
implement it. Thus if minimising delay is a priority for you, you may choose to use a lower slope
crossover, such as 48 dB per octave.
Woofer and Tweeter correction filters, with a 48dB per octave crossover
Woofer and Tweeter correction filters, with a 300dB per octave crossover
The Crossover Frequency (or crossover frequencies for tri-amp templates) can be set by the user.
DEQX Cal will warn if the crossover is set below the limit filter frequency used during the