Installation guide

125
A-):#*U#)&"./*
DEQX Cal can be configured in a number of ways. To change the set up options choose Tools-
Options.
Configuration Tab The Configuration tab is shown below.
Hardware - the PDC can be connected to the PC using either a USB cable or an RS232 cable
(note - not both simultaneously). If an RS232 cable is used, the appropriate port (ie COM1,
COM2, COM3 etc) must be selected.
Units - The DEQX Cal software can use either metric or imperial units for distances. Name-
Library File - This specifies the location of ... The location can be changed by either
typing the full path in the dialog box or by finding the desired location using the browse button to
the right of the dialog box.
Default Project Location - This specifies the default location that projects will be created in, saved
in and searched for. The location can be changed by either typing the full path in the
dialog box or by finding the desired location using the browse button to the right of the dialog
box.