Installation guide

25
The Calibration Wizard covers both analysis and correction phases. You can analyze speakers
and correct them individually or analyze a group of speakers and correct them as a whole.
The Calibration Wizard guides you through this process. For more information refer to Correcting
a Loudspeaker below.
The speaker correction can be verified after it has been generated. See Verifying a Speaker
Correction on page 36. In order to simplify this process, do not move the speaker or microphone
after you have measured the last speaker, because the correction verification process requires
the speaker and microphone to be in the same positions as they were when the original speaker
measurement took place.