Installation guide

Each filter can be further adjusted by using low pass and / or high pass filters and time alignment.

This can be useful when using a full range speaker in conjunction with a subwoofer. For further

details see DEQX Configuration Parameters.

Once the profiles have been configured they can be loaded into the DEQX by clicking on the

Save All To DEQX button.

Note - when the Save All to DEQX button is clicked, all four profiles from the open configuration

are saved to the DEQX.

Since all profiles of a new configuration are disabled until you change them, if you install a

correction filter in just one profile of a new configuration, then save it to the DEQX, the other

profiles of the DEQX will be disabled, irrespective of what those profiles may have been before.

Note that the DEQX Configurations saved to the DEQX unit have been generated in 'non-real

time' i.e. they only affect the processing by the DEQX unit once the Save All to DEQX button is

clicked.

This contrasts to changes made in the DEQX Control Panel, which affect the processing on

the DEQX in ‘real time’ i.e. any change made in the DEQX Control Panel instantaneously

affects the DEQX. For more on this subject see IO Manager in the Reference section.

To save a DEQX Configuration on your PC (not on the DEQX), click on the Save button

once you have set up the DEQX Configuration. This also saves the measurement(s) and

correction(s) you have created.

Finding Out What is Configured on the DEQX

The DEQX Configuration and Equalization on the DEQX unit are reflected on the DEQX Control

Panel in real time. This means, for example, that if you disconnect one DEQX from the PC and

connect another DEQX to the PC, the DEQX Control Panel will automatically update to reflect the

configuration and equalization on the new DEQX unit.

The Filters in the DEQX unit are shown on the DEQX Control Panel when the Download button is

clicked.

In summary, the IO Manager tab, Equalizer tab and Configuration tab are updated automatically

whilst only the Filters tab needs to be updated manually.

Note that the Configuration tab and Filters tab of the DEQX Control Panel are information

windows only - you cannot, for example, create a new configuration or modify an existing

configuration from the Configuration tab of the DEQX Control Panel. To do this, use the

Configuration tab of the Configuration Window.

H/&.'*)(-*I7%72-)%&,*45*

The parametric equalizer can be used to compensate for peaks or troughs in the measured

response of the room. It can also be used to compensate for frequency imbalance in certain

recordings, or to tailor a system to a user’s personal preferences (for example, a brighter high

end).

To display the Parametric Equalizer, click on the DEQX Control Panel icon, and then click on the