Installation guide

60
E7.:71*L""2*4K:71&F7)&".*
To add an EQ Band to counteract a peak or trough in a room measurement, first click on the
‘Add Point’ button on the tool bar at the top of the screen. For instructions on how to move and
shape an EQ band, refer to Using the Parametric EQ.
One way to add EQ that counteracts the room effects shown by a room measurement is to firstly
add EQ bands (up to 10, or 7 if you're using the EQ controls on the optional remote control) so
that the overall EQ line approximately duplicates the line of the room measurement.
Secondly, once you've added all the EQ bands, click on the Invert EQ button to invert the EQ line,
thus producing an EQ line that cancels out the room measurement.