Installation guide

69
13. In the IO Manager, use the gain adjustment for the individual channels to input the gain or cut
that you determined in steps 7 to 12 above. For example, for the example given in step 8,
increase the right speaker channel by 0.5 dB (if it's bi-amped, increase both the right woofer (R2)
and the right tweeter (R3) by 1.5 dB). And for the example in step 10, increase the subwoofer(s)
(L1 and R1) by 6 dB.
14. Repeat steps 5 to 7 to check the adjustments made in step 13. If necessary, repeat steps 8 to
13.
L-:/&.'*4N&/)&.'*E-7/:%-2-.)/O*!"%%-,)&"./*7.?*!".D&':%7)&"./*
The measurement, correction and configuration wizards can be used to access existing data, as
well as creating new data.
Using the Wizards, you can
• View an existing speaker measurement
• Use an existing speaker measurement in a new speaker calibration template
• Use / modify an existing speaker calibration template
• Use / modify an existing configuration
• Copy parametric EQ settings from the PDC to an existing configuration
• Access speaker calibration template(s) which were used in an existing configuration
• View an existing room measurement (Note - existing measurements, calibration
templates and configurations can also be accessed using the Project Explorer. Refer to
Using the Project Explorer in the Working with Projects chapter in the Reference section).
How to View an Existing Speaker Measurement Click on the Speaker Measurement Icon .