Installation guide

87
Within the Room Measurements folder can be any number of room measurement folders. Each
room measurement folder represents a room / audio system combination.
Within each room measurements folder is a Measurement Positions folder. Within that folder are
one or more measurement position folders, nominally representing different locations of the
microphone. However, these folders can also be used to distinguish between measurements
made with adjustments to the audio system, as per the example in the figure above. A new folder
is created each time you click on the Measure Room button or choose Tools - Measure Room
(refer to Measuring a Room).
Within each measurement position folder is a Measurements folder. Within that folder are the
measurements for each driver measured during the room measurement, or each speaker
measured if the drivers were measured concurrently.
S(-*I3!*!".D&':%7)&"./*9"1?-%*
The PDC Configurations folder has sub-folders as shown below.
Within the PDC Configurations folder can be any number of configuration folders. Each of these
configuration folders corresponds to a configuration that can be written to the PDC.