Installation guide

Click on the + sign next to the desired type of measurement / filter, then drill down to select the

particular measurement(s) or filter(s).

For example, click on the + sign next to the Speakers folder, then click on the + sign next to the

desired speaker / measurement format combination. This will show measurements and correction

filters (if any) for that speaker / measurement format combination. Check the box next to the

desired measurement, then click the Next button.

The measurement can be displayed in either:

1. The Viewer (the New Viewer option in the drop-down box shown in the figure above)

2. The Equalizer tab of the PDC Control Panel

3. An existing Viewer window (the Viewer (1) option shown in the figure above) - ie one

containing another measurement that you loaded into the Viewer previously.

Select the window you wish to display the measurement and click the Finish button.