Operation Manual

Mode 2 HD2000 Urgence 2 or 3

1) Make sure HD2000 Urgence is connected to the line.

2) Lift the handset.

3) Depress "PGR" key located on the small keypad.

A "beep" sound should be heard through the receiver.

4) Dial the telephone number to store including *, # or

"Pause" if needed (22 digits maxi).

5) Press the memory location“M1, M2, M3”.

A double "beep" sound confirms the right storage.

6) Replace the handset on hook.

Repeat operation 3 to 5 for the other memories.

NOTE: In case of wrong operation, a long "beep"

sound is emitted. Replace the handset on hook and start

again from the beginning.

NOTE: To erase a number stored in memory, proceed

from 1 to 3, skip section 4 (Do not enter any digit)

press the memory to erase as in 5 and terminate as in 6

and 7.

NOTE: HD2000 Urgence2 and 3 factory settings come

with “Normal“ mode. In case of wrong operation, see

« LIST OF SETTINGS » pages 24-25 and check that

“Normal” mode is selected.

Setting access code : 04

Setting choice Normal:0