Operation Manual

Ringer

Ringer volume can be adjusted with the sliding switch

located on the right side of the telephone.

NOTE: Calls are indicated by the blinking LEDs.

Handset on hold position (Wall-mount position)

See page 4 and 5. This feature can be used to secure

the handset while waiting for someone to “come to the

phone” without going back to on-hook condition.

Wall mount installation

The HD2000 Urgence comes with a line cord and a

small plastic bag containing 1 thin screw and a foam

plug to be used for preventing theft or unauthorized

removal and 2 bigger screws for wall mount fixing.

1-Drill 2 holes as shown on the wall mounting layout.

Install the 2 bigger screws in those holes on the wall.

2- If the telephone must be secured against thefts or

unauthorized removal, drill a third hole as shown on

the wall mounting layout.

3- Align the 2 slots at the back of the HD 2000 in front

of the 2 screws and pull down.

4- If needed, install the third screw through the hole

located above the telephone (See pages 28 and 29) and

hide it with the foam plug.

Boucle sèche (Option)

Off-hook detection (Optional)

Boucle sèche (Option)

Off-hook detection (Optional)

Ligne/Line