HD GENERATOR HD TRACER MODE D’EMPLOI / USER MANUAL RÉF 062102 S.A.S.
CONTENTS SOMMAIRE Installing the batteries ................................. 2 Installation des piles ................................... 2 Introduction HD GENERATOR OFF mode – Continuity mode – Tone mode ..... ....................................................................... 3 Indroduction HD GENERATOR Position arrêt – continuité – envoi de signaux ... ....................................................................... 3 HD TRACER OFF mode – Selective tracing mode – Large tracing mode .....
The «HD GENERATOR» and «HD TRACER» Depaepe tools for cable research and identification comply with EN 60950 specifications. Les appareils «HD GENERATOR » et «HD TRACER» pour la recherche et l’identification de câbles de la société DEPAEPE sont conformes à la norme de sécurité en vigueur EN 60950 Amendements 1 à 11. HD TRACER and HD GENERATOR HD TRACER et HD GENERATOR Installing the batteries. Installation des PILES 2 AA type batteries need to be installed in each unit.
Introduction Indroduction The 3 position switch located above the HD GENERATOR provides 3 different operating modes : Le HD GENERATOR possède 3 positions : • OFF/POL position arrêt : cette position permet aussi de savoir s’il y a une tension sur une ligne téléphonique et quelle est sa polarité. • OFF/POL mode : Selects the OFF mode, no energy is drawn from the batteries.
The 3 positions switch located above the HD TRACER provide 3 different modes: Le HD TRACER possède 3 positions : OFF : dans cette position l’appareil est arrêté. • OFF mode : Selects the OFF position, no energy is drawn from the batteries. : cette position indique que le HD TRACER est en mode de recherche sélective. • : cette position indique que le HD TRACER est en mode de recherche large.
User manual HD GENERATOR Notice HD GENERATOR A) OFF/POL mode In this position, no power is drawn from the batteries. When connecting the alligator clips to a telephone line, the HD GENERATOR will indicate if the line is powered by lighting up leds that will also check the line polarity : - The red led lights up when “TIP” is connected to the red clip and “ring” to the black clip. - The green led lights up when “r ing” is connected to the red clip and “TIP” to the black clip.
B) Position : Continuité ou COURTCIRCUIT Cette position permet de savoir rapidement s’il y a sur une ligne (non alimentée) un court-circuit ou une coupure : - Le court-circuit est généralement provoqué par un élément de fixation comme une agrafe, un clou ou simplement par une erreur de câblage. Après avoir sélectionné la position , brancher le HD GENERATOR sur les 2 fils supposés en court circuit.
- La coupure d’un des deux fils de lignes peut être également identifiée par la méthode du court-circuit pour : Après avoir sélectionné la position , brancher le HD GENERATOR sur les 2 fils où l’on suppose une coupure et provoquer un court-circuit à l’arrivée du câble 1 entre les deux fils identifiés. Si le voyant s’allume de couleur ver te et qu’un signal sonore «BEEP» est émis, cela signifie qu’il y a un court-circuit provoqué : la ligne n’est pas coupée.
C) TONE GENERATOR mode In this mode, the unit generates tones which can be injected on an unpowered line. Once carrying those tones, the line will be easily detected by the HD TRACER or by a HD testset in the monitor mode : - Select the position. - Connect the alligator clips to the line you wish to detect. - Use the HD TRACER or a HD Testset in monitor mode to trace the tones and locate the line you wish to detect.
The HD GENERATOR offers the choice of mono or double frequencies making it easy to identify wires when working with 2 HD GENERATORS to trace different cables. Selection is made by a sliding switch located below the belt clip. Cet appareil peut fonctionner en émmettant des signaux mono-fréquence ou bi-fréquences : Ce choix permet quand on utilise 2 HD GÉNÉRATOR en même temps de differencier les fils « marqués ».
D) CONNECTING THE UNIT The HD GENERATOR comes with a 2 wires cord ter minated by alligator clips to secure the connection to stripped wires. A modular RJ 11 jack located at the base of the unit allows connection to modular jacks and other cordsets.
User manual HD TRACER Notice HD TRACER A) OFF mode When the 3 positions switch is on the OFF position, the HD TRACER is deactivated and no current is drawn from the batteries. A) Position OFF Dans cette position l’appareil HD GENERATOR est arrêté et ne décharge pas les piles.
façon très importante ce type d’inconvénient. Ce mode de détection est representé dans le dessin ci-après par le numéro 2 . Le voyant rouge situé sur le devant de l’appareil indique que celui-ci est en fonctionnement.
Les appareils HD GENERATOR et HDTRACER sont conformes à la norme en vigueur EN60950 amendements 1 à 11 et ne doivent être raccordé qu’à des lignes non-alimentées. The HD GENERATOR and HD TRACER comply with the EN60950 A1 to 11 and have to be connected on the non-powered line.