Operation Manual

- Display shows “ALARM 1 OFF”, and the “1” is blinking
- There are 3 alarm groups, user can change the group by pressing ↓ or ↑
- Press “OK” to edit the wanted group
- “OFF” is blinking, also switch “ON” or “OFF” by pressing ↓ or ↑
- Chose “ON” to set timer and “OFF” to stop timer and press “OK”
- User can input the alarm time as date and time setting.
When the alarm time is up, if the user is operating the phone, or if there is an incoming call, the
alarm will not operate.
15.5 Baby Call
If this function is enabled, press any key, except “OK”, the phone will dial out the party number
automatically. Lifting the handset will also dial out the number.
- Press “Menu”
- Press ↓ until you see « BABYCALL »
- Press “OK”
- Display shows “BABYCALL OFF”, also switch “ON” or “OFF” by pressing ↓ or ↑
- Chose “ON” to enable this function and press “OK”
- User can input the contacting number. After inputting the desired number, press “OK”
15.6 Ringer melody
- Press “Menu”
- Press ↓ until you see « RING MELODY »
- Press “OK”
- LCD will show the current ring, and the phone performs the selected ring for 1 second (Only the
melody not the volume)
- Chose the desired ring by pressing ↑ or ↑ and confirm by pressing “OK”
15.7 Storing a contact in the phonebook
- Press “Menu”
- Press ↓ until you see « PHONEBOOK INPUT »
- Press “OK”
- Enter the number (22 digits max) and confirm by pressing “OK” (key “C” can be used to erase the
last digit)
- Enter the name (16 characters max) using the keypad (see below) and confirm by pressing « OK ».
Wait for the cursor to move on before you enter the next letter. Key “C” can be used to cancel the
last character
“A” press
“B” press twice
“C” press three times
“2” press four times
23