Operation Manual

- The existing setting will be displayed, user can change the setting by pressing ↓ or ↑. There are 5
choices: “BARRING OFF”, “PGR BARRED”, “PGR+KEYB BARRED”, “PGR+MEM+PHB
BAR”, “ALL BARRED” (see table above)
- Press “OK” to confirm the choice
16 USE
16.1 Dialing in on-hook mode
Enter your correspondent’s number on the keypad. The number is displayed on the screen. Pickup
the handset or press the hands-free key or (redial key) to dial the number
16.2 Handset volume
5 Volume steps are available.
Choose your handset volume as follows: Press the to increase the volume and to
decrease, each step is 5 dB.
The last volume choice is always memorized.
16.3 Using hands-free mode
You can make or receive calls « Handsfree » by pressing key. The indicator lamp will light
during speakerphone operation.
Adjust the volume in 5 steps by keys, each step is 5 dB. The last volume choice
is always memorized.
16.4 Using a headset
The Headset feature is available when a headset is connected to the “Headset port”
The headset mode is activated when the key is pressed. The indicator lamp will light during
Headset operation. .
The Headset volume can be adjusted, 5 Volume steps are available.
Choose your handset volume as follows: Press the key
to increase the volume and
to decrease, each step is 5 dB.
The last volume choice is always memorized.
16.5
Picking up a call
There are different ways to pick up a call :
- Pickup the handset
- Press and start talking in handsfree mode
- Press the key if headset is connected on the phone
Note: if the ringer is off, the incoming call will be indicated on the display and by the Call LED
(flashing).
25