Operation Manual

EN 53/79
 Last Number Redial
To search for and redial a number in Redial Book, press the key or "Redial" soft
key. The LCD displays the last number you dialed. If you want to scroll through the
memory, press
or key repeatedly until you find the number you want to dial.
Press the
key to dial out the number.
Use Redial Book options:
When the number appears on the display, press the "More" soft key to choose the desired
option:
- Add to PB. : Allows you to add the number to the phone book.
- Delete : Allows you to delete the selected number.
- Delete All : Allows you to delete the whole redial book.
 CID Book
If you missed one or more calls, the icon will appear on the LCD. If the caller's
information is transmitted from the network on which the call was made (and the caller
doesn't hide it), the caller's phone number is displayed.
You can access the CID book by pressing the
key in standby mode. Use or
key to view the numbers, you can make a call by a press of the
key. Each item of
EN 54/79
the incoming list is marked with the ↑ icon if the call has been reviewed or with the
icon if the call hasn't been reviewed yet. If the CID memory is full, the
icon will flash
on the LCD. To delete a number in the CID Book or add a number to the Phone Book
use the Menu as described in page 61.
 Dialing a Number from Phone book
If you have stored user numbers in your phonebook (described in page 64), you can
viewing the phonebook entries to dial a number:
- Press the
key.
- Press
or key repeatedly until the desired entry is displayed.
- Then press the
key.
 Muting the Microphone
During a conversation, you can temporarily switch your phone's microphone off, so that
the other party cannot hear you.
- To mute your microphone, press the "Mute" soft key during the conversation. The
"Call Muted" appears on the LCD.
- To unmute your microphone: press the "Mute" soft key again. You will restore the
normal condition.
EN 55/79
 Key Lock
If you turn on this feature, all keys will be locked. You can answer calls by using the
key.
- To lock the keys, in the standby mode just keep the
key pressed till the display
shows "HS Locked", then the
icon appears.
- To unlock the keys, keep the
key pressed again till the key lock icon
disappears from the display.
 Flash signal
When the line is engaged, pressing the "Flash" soft key sends the Flash signal. This key
is used in conjunction with special services (e.g. call waiting) which can be available in
your phone network. To configure the Flash time see page 67.
 Paging
You can page the handset from the base unit making it ring with a special tone. It's
useful to locate a lost handset. Press the paging key (see page 45) on the base unit (less
than 5 seconds), all the handsets registered to the base will ring for about 60 seconds.
Note : On a long press, more than or equal to 5 seconds, the base will enter subscription
mode.
EN 56/79
 Registration
The supplied handset is already registered with the number 1. You can register to your
base additional handsets (up to 5 in total) in order to share the same line with other
people. You can also register a handset up to 4 bases.
On the base :
Before registering a handset to the base, you should press and hold the paging key
located on the bottom of the base for more than 5 seconds then release it.
With the handset:
- Press the "Menu" soft key.
- Press
or key repeatedly to choose the "Registration." Then press "Select"
soft key.
- Use
or key to scroll through the base names list, press "Select" to choose
the base. The handset will search for the requested base.
- If the base is found, you will be prompted to enter the PIN code (the default one is
0000). Enter it then press the "Select" soft key. If the PIN code is correct, the
Registration tone will sound and then the base assigns a number to the handset,
otherwise a warning tone will sound.