Instructions / Assembly

INSTALLATION
Carefully remove all parts and hardware from carton, along with any protective plastic
packaging. Do not discard any contents until after assembly is complete to avoid accidentally
discarding small parts or hardware.
CONCLUDING REMARKS
▷Thank you very much for your support and choose to purchase our products,
If you like it, a positive review will strongly encourage us to do better in the future;
If you have any questions about this product, please feel free to contact us.
▷Finally, sincerely wish you and your families have a great life.
If you have any questions regarding your purchase,
please feel free to contact us at:
▷ In the USA/CA: E-mail: [e-mail]
▷ In the EU: E-mail: [e-mail]
Installation Steps
A. Power off.
B C. First, nail 2 expansion rubber particles
into the ceiling, and then use 2 screws to
tighten the Bagua board to the ceiling.
D E. First, wrap the copper wire on the ceiling
box around the green screw, then tighten it to
the Bagua board, connect it to the customer’s
home ground, and then connect the wires in
order according to the color.
F G. Tighten the ceiling box with 2 nuts to fix it
on the Bagua board, and then twist the lower
cable buckle to adjust the appropriate cable
length.
H I J. Align the bamboo lampshade and the
snap ring with the lamp holder in turn, then use
the snap ring to lock the bamboo lampshade
on the lamp holder, and finally install the bulb.
K. Turn on the power.
Note:This product does not contain light bulbs.