Technical data

96
Version 125
- Remove the clamp fastening the coupling to the cylinder.
- Remove the 10 clamps.
- Remove the flywheel cover.
REMOVING THE STATOR
Version 125
- Remove the oil minimum pressure switch electric terminal.
- Remove the 2 Pick-Up screws and the screw of the wiring
fixing bracket, along with the 2 stator fixing screws shown in
the figure.
- Remove the stator and its wires.
Version 250
- Remove the 2 Pick-Up screws and the screw of the wiring
fixing bracket, along with the 3 stator fixing screws shown in
the figure.
- Remove the stator and its wires.
OG SO