Shenzhen Dericam Technology Co.,LTD M801W User Manual User Manual Model: M801W Indoor Pan/Tilt/Zoom IP Camera -ContentsChapter 1. Introduction of Camera……………………………………… 2 Chapter 2. Package Contents…………………………………………………2 Chapter 3. Physical Descriptions………………………………………….3 Chapter 4. Surveillance Software GUI………………………………….4 Chapter 5. Camera Advanced Settings………………………………..10 Chapter 6. Specification…………………………………………………………..20 www.dericam.net Copyright @ Shenzhen Dericam Technology Co.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 1 Introducing Indoor PTZ IP Camera M801W Dericam Low-cost Indoor Pan/tilt IP camera M801W with 3X optical Zoom feature is designed to meet the demands for indoor IP video surveillance in the DIY Home & SME & Small business security markets. This camera is specially designed to offer you a way to view what is going on inside your home, warehouse, shops or office.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 3 Physical Descriptions Fig3.1 Physical parts description 1------ WIFI Antenna 2-------IR LEDs 3------ Lens 4------ Built-in microphone 5------ Built-in speaker Note Please never press reset button unless you have forget the password to login the camera. www.dericam.net Copyright @ Shenzhen Dericam Technology Co., Limited 3 tech@dericam.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 4 Surveillance Software GUI Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick installation, you can take time to learn the operation of the software. 4.1 Login Window Fig4.1 Login window of Dericam M801W Please check the login window above, it was divided to 5 sections from no. 1 to 5. 4.1.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 4.2 Surveillance Window Fig4.2 Surveillance Window of Dericam M801W Please check the surveillance window above, it was divided to 5 sections from no. 1 to 5. 4.2.1 Section 1 Multi-windows Switch button You can select 1 window, 4 windows, 9 windows by clicking the switch button above. Fig4.3 Switch to 4 surveillance windows www.dericam.net Copyright @ Shenzhen Dericam Technology Co., Limited 5 tech@dericam.
Shenzhen Dericam Technology Co.,LTD 4.2.2 Section 2 M801W User Manual Image Parameters Settings Flip & Mirror You can flip the image by enabling Flip button, or mirror the image by enabling Mirror button. Resolution 1) 320x240-------QVGA 2) 640x480-------VGA There are two resolutions, the bigger one (VGA) is 640x480 pixels, and the smaller one (QVGA) is 320x240 pixels. The bigger the resolution, the better of the image quality is, but the lower the frame rate is.
Shenzhen Dericam Technology Co.,LTD 4.2.3 Section 3 M801W User Manual Pan/tilt Control 1------Up control button, 2------Down control button, 3------Left control button, 4------Right control button, 5------Vertical Patrol control button, 6------Stop vertical patrol control button, 7------Horizontal Patrol control button, 8------Stop horizontal patrol control button, C------Restore center position Dericam indoor PTZ IP camera M801W supports movement by 4 directions, Up, Down, Left and Right. 4.2.
Shenzhen Dericam Technology Co.,LTD M801W User Manual Fig4.4 Preset position 1 Fig4.5 Preset position 2 www.dericam.net Copyright @ Shenzhen Dericam Technology Co., Limited 8 tech@dericam.
Shenzhen Dericam Technology Co.,LTD 4.2.6 Section 6 M801W User Manual For Administrator For Administrator------Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel. Fig4.6 Administrator Control Panel 4.2.7 Section 7 Play & Stop & Talk Buttons 1------Play Click it to play the video of the camera 2------Stop Click it to stop the video of the camera 3------Talk Enable talk function, and use microphone at PC end to talk to the camera 4.2.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5 Advanced Camera Settings Click the bar “For Administrator”, goes to Administrator Control Panel to make advanced camera settings. 5.1 Device Information Fig5.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5.3 Date & Time Settings Fig5.3 Date & Time Settings Go to option “Date & Time Settings “ 1------Device Clock Time zone Select the time zone which belongs to your region 2------Sync with NTP Server Enable with Network Time Protocol 3------Sync with PC Time Enable to sync with your computer’s time 5.4 User Settings Fig5.4 User Settings Go to option “Users Settings “ The default user name is admin, and there is no password.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5.5 Multi-device Settings If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if there is 8 cams installed. 5.5.1 Multi-Camera Settings within LAN( Local Area Network) Fig5.
Shenzhen Dericam Technology Co.,LTD M801W User Manual and click Add button to take effect. Showed as Fig5.6 above 5.6 Basic Network Settings Fig5.7 Basic Network Settings Go to option “Basic Network Settings “ 1------Obtain IP from DHCP Server Enable DHCP, if disable DHCP, you can assign IP address by yourself 2------Http Port You can change port no. here by entering customized no. and click set 3------Network Lamp Enable/Disable Network signal LED if there is one. 5.7 Wireless LAN Settings Fig5.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5.8 ADSL Settings Fig5.9 ADSL Settings Go to option “ADSL Settings “ If you are connecting the camera directly to an ADSL modem, you can do ADSL settings with your ADSL account & password provided by the ISP, then make the camera connected to the network. We would not recommend you use this method, for DIY WIFI Camera is designed to use with WIFI routers. You can just leave this setting alone. 5.9 UPnP Settings Fig5.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5.11 Mail Service Settings Fig5.12 Mail Service Settings Go to option “Mail Service Settings “ 1------Sender Email address to be used as a sender 2------Receiver 1 to 4 Email address to be used as a receiver, up to four receivers 3------SMTP Server SMTP Server of the Sender mailbox 3------SMTP Port SMTP port no.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5.12 FTP Service Settings Fig5.13 FTP Settings with FTP server within LAN Fig5.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5.13 Alarm Service Settings Fig5.15 Alarm Service Settings Go to option “Alarm Service Settings “ 4------IO Linkage on Alarm Enable or disable Motion detection alarm service From 1 to 10, the bigger the number is, and more sensibility it is.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5.15 Upgrade Device Firmware Note Fig5.17 Upgrading WEB UI 1) All Dericam camera are sold out with latest version of firmware, please try to contact us to see if there is a new version of firmware before you want to upgrade the firmware. 2) Please do not try to upgrade the firmware, if the existing firmware works ok. It takes risk of making the camera dead if the upgrading operation is not right.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 5.17 Restore Factory Settings Fig5.19 Restore Factory Settings 5.18 Reboot Device Click option “reboot device” to get the camera restarted, which is the same as unplug the power and re-plug it. 5.19 Log Fig5.20 Record of login in information Log record shows the date, time, user account, IP address accessed 5.20 Back Click Back button to go back to surveillance window www.dericam.net Copyright @ Shenzhen Dericam Technology Co.
Shenzhen Dericam Technology Co.,LTD M801W User Manual 6 Specification Specifications ITEMS M801W Image Sensor Image Sensor 1/4" Color CMOS Sensor Display Resolution 640 x 480 Pixels(300k Pixels) Lens f=4~9mm, F:2.4 ( Veri-focal Lens ) Mini. Illumination Lens Audio Video 0.5Lux Lens Type Veri-focal Glass Lens Viewing Angle 65 Degree Input Built-in Microphone Output Built-in Speaker Image Compression MJPEG mage Frame Rate Max.