Operation Manual

Shenzhen Dericam Technology Co.,LTD M801W User Manual
www.dericam.net Copyright @ Shenzhen Dericam Technology Co., Limited [e-mail]
16
5.12 FTP Service Settings
Fig5.13 FTP Settings with FTP server within LAN
Fig5.14 FTP Settings with FTP server within WAN
Go to option “FTP Service Settings “
1------FTP
Server The link address of the FTP Server where you want to upload images
2------FTP Port The Port number of the FTP server, normally standard port is 21
3------FTP User The user account of the FTP server
4------FTP Password The password of the FTP user account
5------FTP Upload Folder Saving path of the FTP folder
6------FTP
Mode Two modes, standard (POST) mode and passive (PASV) mode
1) If your FTP server is set up within LAN, you can set as Fig5.13, If you have a FTP server which you can access
via internet, you can set as Fig5.14.
2) Please make sure that the folder you plan to store images is available. The camera can not generate the folder
itself. And also, the folder must be erasable.
Note