Use Instructions

11
PRE-TREATMENT INSTRUCTIONS
Step One
 Remove all makeup thoroughly
 Cleanse your skin with your preferred skin cleanser.
 Dry your face completely before you begin treatment.
Step Two
 Unplug baery charger prior to use. The NIRA Skincare Laser will not operate while the device is connected to the USB C.
Step Three
 Turn on device by pressing the power buon for approximately 1 second; you will hear a set of beeps and the NIRA Star logo a nd power level lights will turn on.
Step Four
 Idenfy the reject tone: While holding the device in front of you and making sure the device p has NO direct contact with the skin,
press and release the treatment buon. You will hear a set of quick low -pitched beeps that indicate a rejecon pulse.
 The rejecon tone indicates that the device p did not have full contact with the skin. If you hear this tone during treatm ent you need
to reposion the device p making sure there is full skin contact.
Step Five
 Set the treatment power level to 1 by pressing and releasing the power buon quickly unl only one light displays in the po wer level seng area. (Illustraon
of power levels low to high is shown to the right)
 Test this power level by placing the device p on the skin under the outer corner of your eye. While holding the device p in place, press and release the
treatment buon unl you hear
two high pitched beeps approximately 1 second part from another.
Note: If you hear the rejecon tone when pressing the treatment buon this may be because the device p lost contact with the sk in.
Reposion the device p making sure there is full skin contact and try again.
 For best results use the highest power level seng where you feel warmth without pain. You can adjust the power level se ng by pressing and releasing the
power buon.