Use Instructions

20
EMC INFORMATION
The NIRA Skincare Laser needs special precauons regarding EMC and needs to be installed according to EMC informaon. The d evice contains hardware capable of Bluetooth Low
Energy (BLE) communicaon. This hardware can receive and transmit RF energy in 2400 —2483.5 MHz frequency range with DSSS modulaon. It is compliant with CFR Title 47, FCC part
15.249 and ETSI EN 300-400 standards, and equivalent isotropically radiated power is less than 10 dBm (10mW).
Cauon: Mobile RF communicaons equipment can aect the NIRA Skincare Laser device.
Warnings: The use of accessories and cables other than those specied in this document may result in increased emissions or decreased immunity of the NIRA Skincare Laser.
Warnings: The NIRA Skincare Laser should not be used adjacent to or stacked with other equipment treatments.
Electromagnec Emissions Declaraon
The NIRA Skincare Laser is intended for use in the electromagnec environment specied below. The customer or the user of the NIRA Skincare Laser should assure that it is
used in such an environment.
RF emissions CISPR 11 Group 1
The NIRA Skincare Laser uses RF energy only for its internal funcon. Therefore, its RF emissions are very
low and are not likely to cause any interference in nearby electronic equipment.
RF emissions CISPR 11 Class B
The NIRA Skincare Laser is suitable for use in all establishments, including domesc establishments and
those directly connected to the public low-voltage power supply network that supplies buildings used for
domesc purposes.
Harmonic emissions IEC 61000-3-2 Complies
Voltage uctuaons/ icker emissions IEC
61000-3-3
Complies