Use Instructions
3
4
Treatment
Illustraon of treatment paern
Using the chosen power level hold the device p against the skin starng at the outer
corner of your eye.
Press and release the treatment buon while holding the
device p in place unl you hear a series of two beeps
approximately one second apart indicang that spot has
been successfully treated.
Reposion the device so it is slightly overlapping the previous treatment spot (See
illustraon for overlapping paern) then press and release the treatment buon again.
Repeat this process for 40 pulses on one eye following the 2-3 row paern shown in
the illustraon. Once 40 successful pulses are completed, you will hear a set of three
fast-paced jingle-like tones that indicate the treatment for that eye is complete.
Repeat this process for the opposite eye.
Power down the device by holding down the power buon unl the NIRA logo and
power level lights turn o.
Connue with daily skincare regimen.
For Best Results, repeat this process daily for 90 days or more. To enhance your results
you may treat twice daily.
Press and release the power buon to adjust the
power level. Set your NIRA Laser to level 1.
Place the device p on the skin as shown to the
right. Press and release the treatment buon with
your thumb; you will hear a series of 2 beeps. The
rst beep indicates the laser has begun ring and the
second beep indicates the laser nished ring for
that one spot.
Repeat this process and connue to increase the
power level unl you have reached a power level
where you feel warmth without pain.
CAUTION: Be sure to move the NIRA to a new spot for each treatment. If you
treat the same spot twice in a row, the heat in your skin may build up to a point
where you feel discomfort or pain. This is not recommended and should be
avoided.
3
Test Treatment Level