Instructions / Assembly

www.dero.com | 1-888-337-6729
After appropriate cure time, dig out sand from
sleeves and insert racks, making sure they are
level and at the appropriate height. Pour in Por-
Rok or epoxy grout and allow to set.
3
© 2015 Dero
INSTALL TIP
An easy way to brace
the Swerve Rack while
the grout sets is to
bolt two 1x4” boards
together at one end
and clamp them onto
the legs of the Swerve
Rack like a clothes pin.
SWERVE RACK
Installation Instructions – In Ground Mount