SWITCHBACK™ Setbacks 48” 34” www.dero.
SWITCHBACK™ Installation Instructions – Wall Mount TOOLS NEEDED RECOMMENDED BASE MATERIAL Tape Measure Marker or Pencil Masonry Drill Bit Drill (Hammer drill recommended) Hammer Wrench or ratchet 9/16” Level Solid concrete is the best base material. Brick, block, and wood stud walls may be acceptable. Metal stud walls are not an acceptable material for installation.
SWITCHBACK™ Installation Instructions – Wall Mount 1 2 Before anchoring Switchback™ to wall, insert end of locking cable through larger end of the cable slot and slide cable forward. Anchor Switchback™ to wall following instructions on previous page. www.dero.
