Instructions / Assembly

www.dero.com | 1-888-337-6729
© 2015 Dero
TRACK RACK
Installation Instructions – Floor Mount
Place the Uprights 48” apart from each other. See
your rack layout for location and numbers.
A) For single-sided units, fasten the Upright Braces to the Uprights with 3/8” x 3” bolts, 3/8” washers, 3/8” lock
washers, and 3/8” nuts.
Anchor each Upright by drilling 3/8” holes and
fastening with wedge anchors.
1
3a
2
TOOLS NEEDED
9/16” wrench/socket
¾” wrench/socket, qty. 2
3/8” masonry bit
Tape measure
Drill (hammer drill recommended)
Hammer
Level
INSTALLATION STEPS
Before installing: Make sure the floor is strong enough to
accommodate the rack fully loaded with bikes. Compare parts
shipped with rack to parts list. Call Dero if any parts are missing.