Universal Remote User Manual
www.desatech.com
116710-01C2
9-Volt Battery
Battery
Housing
Installing 9-Volt Battery (Not Included) in
Hand-Held Remote Control Unit
1. Remove battery cover on back of remote
control unit.
2. Removeanddiscardsensortaginsidebattery
housing.
3. Attach terminal wires to the battery. Place
batteryintothebatteryhousing.
4. Replace battery coveronto remote control
unit.
Figure 4 - Installing Battery in Hand-Held
Remote Control Unit
Battery
Cover
Terminal
Wires
Remote Control Unit
REMOTE OPERATION
NOTICE: You must light the pi-
lot before using the hand-held
remote control unit. See Light-
ing Instructions in your owner’s
manual.
1. Afterlighting,letpilotameburnforabout
one minute. Turn control knob to ON posi-
tion.Adjustameadjustmentknobanywhere
between HI and LO. Slide the selector switch
to the REMOTE position (see Figure 5).
Note: The burner may light if hand-held
remote was on when selector switch was last
turned off. You can now turn the burner on and
off with the hand-held remote control unit.
IMPORTANT: Do not leave the selector switch
in the REMOTE or ON position when the pilot
isnotlit.Thiswilldrainthebattery.
Figure 5 - Setting the Selector Switch,
Control Knob and Flame Adjustment
Knob (Available on Some Models) for
Hand-Held Remote Operation
O
F
F
P
I
L
O
T
L
O
I
H
REMOTE
OFF
ON
O
N
Flame Adjustment Knob
(Available on Some Models)
Control Knob
Selector Switch in
REMOTE Position
(Optional Hand-Held
Remote Control)
ON/OFF Series
(Models HRC100 and HRC101)
Hold the control button on the hand-held remote
until burner turns on. Hold the control button again
until burner turns off (see Figure 6).
To Lock press both buttons on hand-held remote
control until light stops flashing. Hand-held
remotecontrolisnowlocked.Ifthereisonit
willbe turned off automatically. In the locked
state,thelightwillnotlightupwhenanybutton
is pressed.
To Unlock press both buttons together on hand-
heldremotecontroluntilthelightstopsashing.
The hand-held remote is now unlocked.
Figure 6 - ON/OFF Hand-Held Remote
Control Unit
Control
Button
Indicator Light
Sensor
Tag