Operating Instruction Electric Staple/Nail Gun PEBNS11/4-B

116261www.desatech.com

Safety Information

WARNING: Follow all safety precautions outlined in these operat-

ing instructions. Improper use of this tool can cause severe injury

or death from ﬁre, electrical shock, or ﬁring staple into body.

Before Operating Tool

1. Read and understand these operating instructions before operating tool.

2. Only well-instructed adults should operate tool. Never allow children to

operate tool.

3. Do not operate tool

• where highly ﬂammable liquids or gases are present

• while under the inﬂuence of alcohol, medication, or drugs

• if exposed to rain or in damp or wet areas

• while tired or in a hurry

• if tool is damaged or malfunctions

4. To reduce the risk of electric shock, this tool has a polarized plug (one blade

is wider than the other) and will require the use of a polarized wall outlet or

extension cord. The plug will ﬁt into a wall outlet or polarized extension cord

only one way. If the plug does not ﬁt fully into the wall outlet or extension

cord, reverse the plug. If the plug still does not ﬁt, obtain a correct polarized

extension cord and contact a qualiﬁed electrician to install the proper wall

outlet. Do not change the tool plug, extension cord receptacle, or extension

cord plug in any way.

5. Use only extension cords marked for outdoor use.

6. Never use this tool

• where a heavy-duty tool is needed

• where not intended. For example, don’t use tool on concrete, metal, or

glass

7. Wear snug-ﬁtting clothing when operating tool. Do not wear loose clothing

or jewelry. They can get caught in moving parts.

8. Wear the following safety gear when operating tool:

• rubber gloves (outdoors)

• footwear with non-skid soles (outdoors)

• eye protection such as safety glasses or goggles which meet or exceed ANSI

standards. Make sure all bystanders also wear proper eye protection.

• hair covering to contain long hair

9. Keep work area well lit.

10. Toggle power switch to the OFF (0) position and unplug tool

• when loading tool

• when not in use

• when moving from one place to another

• before maintenance

• when changing accessories

11. Do not alter this tool in any way. Only use accessories designed for this

tool.