Installation Guide

ManualsBrandsDesign Craft MIllworks ManualsBoard & Batten Shutters15 in. x 39 in. Cedar Board and Batten Baton Z Shutters Pair in Natural Cedar

lightly tap wall anchors

into holes flush to surface

step 2

note:

each shutter pair has it's own fasteners package; 8 each

space as desired

step 1

hold shutter in desired location &

drill 4 mounting holes for each

shutter with

1/4" bit

shutter

fasteners

Installation Instructions, Shutter

step 3

install screws

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/20/2018. This information is updated periodically and should not be relied upon after 2 years from 5/20/2018. Drilling,

sawing, sanding or machining wood products generates wood dust, a substance known to the State of California to cause cancer. Use a respirator or other safeguards to avoid inhaling wood dust.

For more information, go to www.P65Warnings.ca.gov. Questions regarding products or installation please contact us at (214) 730-0655 or by emailing questions@dcmillworks.com.