OZCO Project #315 - DIY Vineyard Pergola Overview (12x12) for dimensional details, see Overview page DIY Vineyard Pergola Overview V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/31/2016 . This information is updated periodically and should not be relied upon after 2 years from 8/31/2016 . Please visit OZCOBP.com to get current information.
= 12'0" 12'0" CL CL 2'0" 2'0" = 13 7'4 16 " 1 9'4 8 " 3 8'2 16 " 1 9'4 8 " Project 315 (12x12) DIY Vineyard Pergola Overview V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/31/2016 . This information is updated periodically and should not be relied upon after 2 years from 8/31/2016 . Please visit OZCOBP.com to get current information.
56627 56608 56610 56621 56677 (Project 327 & 340 only) 56639 56640 follow QR barcode with your smart phone or visit OZCOBP.com for product installation instructions DIY Vineyard Pergola OZCO V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/20/2016 . This information is updated periodically and should not be relied upon after 2 years from 8/20/2016 . Please visit OZCOBP.com to get current information.
Suggested Tools (others may be required) DIY Vineyard Pergola Overview V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/31/2016 . This information is updated periodically and should not be relied upon after 2 years from 8/31/2016 . Please visit OZCOBP.com to get current information.
9 13'2 16 " Locate desired center of structure 1 9'4 8 " 1 9'4 8 " if site is not level, see Ozco Site Leveling instruction Project 315 (12x12) DIY Vineyard Pergola Base for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/6/2016 . Please visit OZCOBP.com to get current information.
for dimensional details, see Overview page 1 ITEM NO. 1 QTY. 2 4 4 PART NUMBER 6x6 Cedar Post 56608 DESCRIPTION 6x6x8'0" 6x6 Post Base Kit (6X6-PB-LS) 4 Cap (finger tight) Tip: To ensure level posts, use Post Level (OZCO #50740; not included) Project 315 (12x12) step 1 DIY Vineyard Pergola Base Tool Required 3/8" Driver OWT Timber Screw V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 .
beam width square pencil post to beam ledge post Cap (finger tight) Tool Required 3/8" Driver 1. 2. OWT Timber Screw Project 315 (12x12) step 2 DIY Vineyard Pergola Base 3. 4. measure beam width and mark dimension as shown with pencil and square. install post to beam ledge on mark. repeat on adjacent side repeat on all posts for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 .
relief cut relief cut left support right support long support Support Identification DIY Vineyard Pergola Support Installation V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/24/2016 . This information is updated periodically and should not be relied upon after 2 years from 8/24/2016 . Please visit OZCOBP.com to get current information.
left support long support relief cut for rafter clip rafter clip left support top view (same for right support) rafter rafter clip behind support Support Installation DIY Vineyard Pergola Support Installation left support long support right support 12x12 Pergola shown left support right support V2.00 - Installation Instructions, Specifications and Project Plans are effective 8/24/2016 . This information is updated periodically and should not be relied upon after 2 years from 8/24/2016 .
3 1 2 4 5 6 = = Project 315 (12x12) Beam & Support DIY Vineyard Pergola Beam & Support ITEM Project 315 PART NO. (12x12)/default/QTY. NUMBER DESCRIPTION 2x8 1 2 Cedar 2x8x12'0" Board 2x8 2x8x9'9 2 2 Cedar 7/8" Board 23" 4x4 Lawnmast 3 2 Cedar er Post Support-le ft 4x4 30" 4 4 Cedar Lawnmast Post er Support 23" Lawnmast 4x4 er 5 2 Cedar Support-ri Post ght Screw, OWT 53/4" 6 1.08 56628 (145mm) Timber with HCN for dimensional details, see Overview page V2.
flush flush Cap (finger tight) Tool Required 3/8" Driver OWT Timber Screw Project 315 (12x12) step 3 DIY Vineyard Pergola Beam & Support for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/6/2016 . Please visit OZCOBP.com to get current information.
once posts are even & level, temporarily secure structure with 2x4 & clamps then install beams then remove 2x4 & clamps = flush = 7 9'9 8 " move posts until top and bottom dimensions are the same and posts are level. dimension shown is for reference Cap (finger tight) Tool Required 3/8" Driver OWT Timber Screw 7 9'9 8 " Tip: To ensure level posts, use Post Level (OZCO #50740; not included) Project 315 (12x12) step 4 DIY Vineyard Pergola Beam & Support for dimensional details, see Overview page V2.
flush Cap (finger tight) Tool Required 3/8" Driver OWT Timber Screw Project 315 (12x12) step 5 DIY Vineyard Pergola Beam & Support for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/6/2016 . Please visit OZCOBP.com to get current information.
1 2 4 3 CL CL 2'0" 1'0" 1'0" ITEM NO. QTY. 1 20 2 4 3 3.32 4 1.328 PART NUMBER DESCRIPTION 2x8 2x8x11 Cedar 1/8" Board 2x6 2x6x9'9 Cedar 7/8" Board 6-8" Joist Hanger 56640 Tab (JHT68-LS) 6-8" Joist Hanger 56639 Flush (JHF68-LS) 2'0" Project 315 (12x12) Rafters DIY Vineyard Pergola Rafters for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 .
flush Tool Required 1/4" Driver Screw Project 315 (12x12) step 6 DIY Vineyard Pergola Rafters for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/6/2016 . Please visit OZCOBP.com to get current information.
flush line up Faux rafers with inside rafters Tool Required 1/4" Driver Screw Project 315 (12x12) step 7 DIY Vineyard Pergola Rafters for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/6/2016 . Please visit OZCOBP.com to get current information.
flush Tool Required 1/4" Driver Screw Project 315 (12x12) step 8 DIY Vineyard Pergola Rafters for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/6/2016 . Please visit OZCOBP.com to get current information.
RAFTERS NOT SHOWN FOR CLARITY relief cut for rafter clip right support left support right support left support Cap (finger tight) Tool Required 3/8" Driver for additional assembly instruction, see Support Installation page OWT Timber Screw Project 315 (12x12) step 9 DIY Vineyard Pergola Beam & Support for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 .
3 Project 315 (12x12) Purlins DIY Vineyard Pergola Purlins 1 2 ITEM NO. QTY. 1 6 2 12 3 15 PART NUMBER DESCRIPTION 2x4 Cedar 2x4x12'0" Board 2x4 Cedar 2x4x10 7/16" Board 2x2 Cedar 2x2x11'0" Board CL = = for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/7/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/7/2016 . Please visit OZCOBP.com to get current information.
2x4 Purlins are centered on Rafters and secured with provided screws at each intersection (not shown) CL CL Project 315 (12x12) step 10 DIY Vineyard Pergola Purlins for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/7/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/7/2016 . Please visit OZCOBP.com to get current information.
2x4 Purlins are centered on Rafters and secured with provided screws at each intersection (not shown) CL CL Project 315 (12x12) step 11 DIY Vineyard Pergola Purlins for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/7/2016 . This information is updated periodically and should not be relied upon after 2 years from 9/7/2016 . Please visit OZCOBP.com to get current information.
4" spacing middle 2x2 Purlin C 2x4 Purlin L Spacing 1. 2. 3. Project 315 (12x12) step 12 DIY Vineyard Pergola Purlins Locate Center Line ( CL ) between "2x4 Purlin Spacing". Install "middle 2x2 Purlin" on CL as shown. Secured provided screws at each intersection (not shown). Install additional 2x2 Purlins spaced as shown. for dimensional details, see Overview page V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/7/2016 .