Installation Guide

ASSEMBLY INSTRUCTIONS
SKU#519504
NOTE: Please consult a qualified electrician if you are not certain of the installation.
CAUTION: Before starting the installation or service, disconnect the power by turning off the circuit breaker or
removing the fuse at the fuse box. Use silicon caulking to seal between wall plate and wall. Leave bottom
unsealed so moisture can drain out.
1. Carefully unpack the fixture, lay out all parts on a clean surface.
2. Attach the mounting strap to outlet box using provided outlet box screws.
3. Tie ground wire from outlet box and from fixture to the ground screw on the mounting strap. Connect white
wire from fixture to white wire (neutral wire) from supply circuit. Connect black wire from fixture to black
wire (live wire) from supply circuit. Cover connections using provided wire connectors.
4. Place the fixture body against wall by aligning the protruding nipple all the way through the wall plate and
tighten lock nut and washer to nipple until the fixture body is held firmly against the wall.
5. Install the bulb. (sold separately)
7. Reconnect the power.
Customer Service: 1-800-558-8700