Instructions / Assembly

Unpacking Precautions
If using a sharp object to unpack the cabinet components and the packing materials, be
careful to avoid scratching or damaging the cabinet components. The various packing
materials may be used to protect the cabinet components during assembly. During the
unpacking process, place the various components away from and to the side of the work
area so that they will not be inadvertently knocked over or otherwise damaged.
Wall Cabinet Model Variations
These assembly instructions include all the steps required to assemble a
Wall Cabinet with or without a Shelf/Shelves.
Required Tools
Phillips Screwdriver
Rubber Mallet
Wood Glue
Hardware Considerations/Screw Size Clarification
(M) Larger 2 3/8''(Optional)
(I) Small 1/2''
(K) Large 1 1/4''
Step 1：
Lay the face frame with doors(A) on a soft surface, doors facing down.
Step 2
Attached rubber bumpers to both the top and bottom of each door where
they make contact with the face frame to prevent damage and reduce noise.
-2-