Installation Sheet

Notes: The picture in this installation instructions is for reference only, pls refer to

actual product in installation process.

and cold water lines,then

5.Loosen screw on adaptor at the end

of flex hose, push adaptor with hose

coupling until you hear a “click”.

Tighten with screws.

sink.

the two

and

slip

water

inlet port.

548305-Stained Nickel

548297-Polished Nickel

548552-Stained Nickel

*548552 Max Flow Rate 2.2gpm

PAGE 1
5.Loosen screw on adaptor at the end of flex hose, push adaptor with hose coupling until you hear a “click”. Tighten with screws. Notes: The picture in this installation instructions is for reference only, pls refer to actual product in installation process. and 548305-Stained Nickel 548297-Polished Nickel 548552-Stained Nickel sink. inlet port. the two *548552 Max Flow Rate 2.
PAGE 2
CARE AND MAINTENANCE LIMITED LIFETIME WARRANTY Clean peridodically with a soft cloth.Avoid abraisive cleaners,steel wool, and harsh chemicals as these will dull the finish and void your warranty TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Leaks underneath handle 1.Shut off the water supply to the faucet that leaks. Bonnet has come loose or O-ring on cartridge is 2.Remove the handle on the problem side. Loosen the bonnet by dirty or twisted. turning it counterclockwise.