Instructions / Assembly

-3-

Step 3

Using the wood glue, squeeze a small bead of glue in all grooves before assembling the

cabinet sides, bottom, top and back panels. Be careful not to use too much glue, this could

cause access glue to squeeze out and onto the panels, if this should happen, be sure to remove

quickly.

Step 4

Slide the Right side panel (R) into the Right groove of the face frame, and mount the male

clip to the face frame with the screwdriver. Each male clip will need 2 small screws (l).

Step 5

Slide the Left side panel (L) into the Left groove of the face frame, and mount

the male clip

to the face frame with a screwdriver. Each male clip will need 2 small screws (l).

Step 6

Slide the bottom panel(B) into the grooves of the right and left side panels,

and then into the

groove in the frame below until it is fully seated.