Installation Guide

-5-
Step 10 (Only for the following items:)
561993 & 562009 & 562017 & 562116 & 562074
561415 & 561498 & 561506 & 561514 & 561522
Secure the center supporter under the bottom panel only for the base cabinet whose width is
over 36'' or wider.
Step 11
Remove the drawer glides from the carton, and separate them into sets: exterior and bottom
parts.
Step 12
Using one small screw attach the glide brackets to the interior back panel using the pre-
drilled holes.
Optional Holes: Exterior two sets are optional for soft-closing drawer glide
Optional
Step 13
Using One small flat head screw to attach both left and right exterior drawer glides to the
interior edge of the face frame left & right for each drawer.
Exterior
Bottom