Installation Guide

SAVANNAH TABLE LAMP SKU# 589119-BLK
ASSEMBLY / INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards.
If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified
electrician. Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation instructions. Tools are
required when installing this fixture.
ASSEMBLY AND INSTALLATION
1. Carefully unpack the fixture, lay out all parts on a clean surface.
2. Place the METAL SHADE over the socket and secure with the SCREW A tightly.
3. Install the BULB (Not included).
You can adjust the lamp height by pulling the arm up and down and tighten it with SCREW B on the stem
Turn on switch, and you can enjoy the new lamp.
Customer Service: 1-800-558-8700
ITEM# 589119-BLK
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.