Installation Guide

Notes: The picture in this installation instructions is for reference only, pls refer to

actual product in installation process.

and cold water lines,then

5.Loosen screw on adaptor at the end

of flex hose, push adaptor with hose

coupling until you hear a “click”.

Tighten with screws.

sink.

the two

and

slip

water

inlet port.

562561-Stained Nickel

562579-Polished Nickel

562587-Oil Rubbed Bronze

ANSI / NSF 61-9

and Oil rubbed Finished

PAGE 1
5.Loosen screw on adaptor at the end of flex hose, push adaptor with hose coupling until you hear a “click”. Tighten with screws. Notes: The picture in this installation instructions is for reference only, pls refer to actual product in installation process. 562561-Stained Nickel 562579-Polished Nickel 562587-Oil Rubbed Bronze and ANSI / NSF 61-9 sink. inlet port.
PAGE 2
CARE AND MAINTENANCE LIMITED LIFETIME WARRANTY Clean peridodically with a soft cloth.Avoid abraisive cleaners,steel wool, and harsh chemicals as these will dull the finish and void your warranty TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Leaks underneath handle 1.Shut off the water supply to the faucet that leaks. Bonnet has come loose or O-ring on cartridge is 2.Remove the handle on the problem side. Loosen the bonnet by dirty or twisted. turning it counterclockwise.