Use and Care Manual

Step 4
With the hook rack in place, you can add your half shelf to the top of your rack. Position the two halves of shelf clip (E) so
that the beveled edge is facing the top. Snap the clip together around the pole and adjust until you feel it locate the
groove. Once clips are snapped into place at equal heights at the top of your two back poles, slide your half shelf down
from the top to rest on the clips. Gently tap with a rubber mallet if needed to secure shelf.
H
B
Shelf Clip (H) Assembly
If having difficulties getting the shelf
into place, use a rubber mallet. Use
only a rubber mallet to avoid damage.
Step 3
Once the shelves are in place, select the groove (spaced in 1” increments) where you’d like the hook rack (F) to rest. Position the
two halves of your shelf clip (H) so that the beveled edge is facing the top. Snap the clip together around the pole and adjust until
you feel it locate the groove. Once clips are snapped into place at equal heights on each of the 2 back poles, slide the hook rack
down from the top to rest on the clips. Gently tap with a rubber mallet if needed to secure rack.
The designs, images, artwork, product descriptions and data shown in this document are protected by U.S. and foreign patent, copyright, trade dress and contract law and may not be copied, imitated,
duplicated or used in any manner other than as herein proposed. Design Ideas oers these materials to viewer solely for the purpose of allowing viewer to reference assembly or care instructions for the
depicted products purchased from Design Ideas. By viewing them, viewer agrees to this restriction and not to any other use of same whatsoever. Any other use or further distribution of the shown designs,
images, artwork, text and/or data by viewer or further recipients of same is strictly forbidden. Design Ideas, Ltd. will enforce its intellectual property rights in this material to the fullest extent of the law.
Designs and contents copyright 2018 Design Ideas, Ltd. DESIGN IDEAS and other trademarks are registered and/or owned by Design Ideas, Ltd.
H
H
F
Shelf Clip (H) Assembly
If having difficulties getting the rack
into place, use a rubber mallet. Use
only a rubber mallet to avoid damage.