Installation Guide

5. Insert anchors into the ends of the horizontal spacer where it

meets a jamb. Make sure center ﬁnger of anchors ﬁt into the

top of the center groove of the spacer.

6. Place the spacer in the bottom of the opening, centered in the

section. DO NOT install with screws.

4. For Terminal Linear and Terminal Curvo, trim the end of the

horizontal spacer to ﬁt the shape by cutting the two corners

at a 45

angle 3/4” from each corner.

(test Fit the First rOw COntinued)

3/4”

Angle