Installation Guide

D. Push a spoon shaped ﬁnishing tool over the joints at a 45

angle to

collect the excess sealant and seal the joint. Periodically wipe the

sealant from the ﬁnishing tool.

E. Seal the vertical joints in the same manner. Carefully work the joint

intersections to create a smooth ﬁnish.

F. Let the sealant cure for 48 hours before putting any stress on the

panel.

G. Seal the perimeter joints with sealant.

Maintenance

An important part of the functional beauty of Seves

Glass Block products is that they are virtually main-

tenance free! There’s nothing to rot, rust, peel or

paint. All that is needed is an occasional wiping with

a damp, soft cloth on interior panels or a hosing on

exterior panels. With minimal attention, your Seves

Glass Block will remain sparkling and beautiful for

years!

If you need assistance

We hope these instructions are clear and answer

your questions about the installation of Seves Glass

Blocks and Finishing Units with the ProVantage

Glass Block Installation System. For more informa-

tion on Seves Glass Block visit our website at: seves-

glassblockinc.com.