Operating Guide

• This method is used to install straight walls in 4-sided
openings.
• In this method, glass block is installed in a perimeter
channel.
• The maximum opening size for exterior panels is 50
square feet, framed on all four sides.
• The maximum opening size for interior panels is 85
square feet, framed on at least two sides.
• The joints of these panels may be finished with grout
( see page 25 ), or silicone ( see page 26 )
1
• This method is used to install straight, and 90° sharp
corner and finishing pieces attached walls at two,
three or four sides.
• In this method, glass block panels are secured to the
wall using special wall anchors.
• The maximum opening size for exterior panels is 50
square feet, framed on all four sides.
• The maximum opening size for interior panels is 85
square feet, framed on at least two sides.
• The joints of these panels may be finished with grout
( see page 25 ), or silicone ( see page 26 )
Installation Method
#
2 (Wall Anchor Construction)
Installation Method
#
1 (Channel Construction)
Glass Block Silicone Installation System
Assembly Instructions
Seves Glass Block
The installation systems described in this booklet make
achieving professional installation results of SEVES Glass
Block, 80mm, easy.