User Manual

1 . 8 0 0 . 5 2 5 . 0 7 3 3
DESIGNTOSCANO.COM
FU-72447
Rain Forest Leaves Cascading Metal Fountain
FOR
YOUR
INSTRUCTIONS
PRODUCT
©Copyright 2017, Design Toscano, Inc.
FOR
YOUR
T H A N K YOU
P U R C H A SE
Thank you for your recent purchase
of this Design Toscano hand-crafted
metal fountain. We have taken great
care to create this piece especially
for you. Please review these
instructions and assemble
this piece with care.
Step 1
Connect tubing from fountain
feature to intake on pump.
Place pump inside base of
fountain. Feed plug through
circular hole in fountain frame.
Place top of fountain into the base.
Fill base with water making sure
pump is fully submerged.
Step 2
Plug in fountain and adjust
water flow as needed. Move the
switch towards (+) to increase
flow rate and towards (-) to
decrease flow rate. Water will
naturally evaporate depending on
conditions. Add water as needed.
Never let the pump run dry as it
will damage the motor.