Specifications

SURFACE MODE

Surface Mode, identified by the Surface Time icon (Fig. 14a), fol-

lows Diagnostic Mode after Activation. Information includes Dive

Number '0' (no dive made yet), Surface Time (with flashing colon),

Temperature (and icon), Time of Day (with icon), the Battery Indi-

cator, and Tank Pressure.

NOTE: If the wet contacts are bridged, the graphic

'H2O' will appear in place of the dive number '0'

(Fig. 15). After the unit is rinsed and dried, 'O' will

replace 'H2O'.

WARNING: If a Low Battery condition is displayed

after diagnostics (icon flashing), DO NOT dive with

the ATMOS

until the Battery is changed.

While in the Surface Mode you can access various other Modes that

are described in detail throughout this manual.

 Press the Advance (Front) button to access a sequence that in-

cludes Plan, Fly, DeSaturate, and Log Modes .

 Press the Select (Bottom) button to activate the Backlight.

 Press Both buttons (simultaneously) to access Set and Simulator

Modes.

Fig. 14 - Surface Mode

Fig. 15 - Surface Mode

(rinse and dry the unit)